Selecting Whiteboard Settings - Epson BrightLink EB-725Wi User Manual

Note: You cannot scan with standalone scanners or printers that have run out of ink or cannot print. Only
Epson All-in-One products that support ESC/P-R commands are supported. When importing from a
scan, you cannot use the scan button, the partial document or image scanning function, or the Automatic
Document Feeder (ADF), even if these are available on your product.
1. Select the
2. Do one of the following:
• Select USB or Network, then locate and select the image you want to add.
• Load your original in the scanner, select Scan, and choose the settings for the scanned image as
necessary.
3. Select Open or Scan.
After a moment, the image appears on the whiteboard page.
4. Select the
• To move the image, touch inside it and drag the image.
• To resize the image, touch any corner and drag inward to shrink or outward to enlarge.
• To rotate the image, touch the
5. Use the menu in the bottom right corner of the image to select any of the following as necessary:
• Duplicate creates a copy of the image on the current whiteboard page.
• Copy copies the image on the whiteboard. Touch a location on the screen to paste a copy of the
image.
• Paste creates a new copy of the image. Drag the image to the desired location.
• Delete removes the image from the whiteboard.
When you are finished, select any other tool from the whiteboard toolbar to exit image editing mode.
Parent topic:

Selecting Whiteboard Settings

Follow the instructions in these sections to select settings for capturing, scanning, saving, printing, and
emailing in Whiteboard mode.
Note: If the Menu Protection password setting is set to On for the Interactive option, you cannot
change settings in the Interactive menu.
Insert Image tool.
Select tool and do any of the following as necessary:
icon at the top of the image and drag left or right.
Built-in Whiteboard Mode
224