Solutions When The Image Is Fuzzy Or Blurry - Epson BrightLink EB-725Wi User Manual

• If you adjusted the image shape using the projector controls, try decreasing the Sharpness setting to
improve image quality.
• If you connected an extension power cable, try projecting without it to see if it caused interference in
the signal.
• If you are using the USB Display function, turn off the Transfer layered window setting in the Epson
USB Display Settings program on your computer.
Parent topic:
Related references
Input Signal Settings - Signal I/O Menu
Supported Video Display Formats
Image Quality Settings - Image Menu
Related topics
Connecting to Video Sources
Connecting to Computer Sources

Solutions When the Image is Fuzzy or Blurry

If the projected image is fuzzy or blurry, try the following solutions:
• Adjust the image focus.
• Clean the projection window.
Note: To avoid condensation on the projection window after bringing the projector in from a cold
environment, let the projector warm up to room temperature before using it.
• Position the projector close enough to the screen, and directly in front of it.
• Verify that the throw distance from the projector to your projection surface meets the specifications in
your projector's online Installation Guide.
• Position the projector so the keystone adjustment angle is not so wide that it distorts the image.
• Adjust the Sharpness setting to improve image quality.
• If you are projecting from a computer using a VGA cable, press the Auto button on the remote control
to automatically adjust the tracking and sync. If any bands or overall blurriness remain, display a
uniformly patterned image on the screen and manually adjust the Tracking and Sync settings.
• If you are projecting from a computer, use a lower resolution or adjust the computer's resolution to
match the projector's native resolution, if possible.
Solving Image or Sound Problems
314