Calibrating Manually - Epson BrightLink 710Ui User Manual

This screen appears:
4. Adjust the image focus, if necessary.
5. Press Enter to select Yes.
A pattern appears then disappears, and the system is calibrated. If you see a message that
calibration failed, you need to calibrate manually.
The cursor location and pen position should match after calibration. If not, you may need to calibrate
manually.
Parent topic:
Related tasks

Calibrating Manually

Calibrating Manually
If the cursor location and pen position do not match after auto calibration, you can calibrate manually.
Pen Calibration
178