Knife Setting Gauge - Grizzly G1182 Instruction Manual

H. KNIFE SETTING GAUGE
To assemble the Knife Setting Gauge:
1. Insert the steel rod through the hole in each
adjuster arm until the notches for the E-clips
extend past the adjustment arms on both
sides.
2. Attach the E-clips to the notches to lock
adjustment arms onto the steel rod. The
adjustment arms are symmetrical, so the
placement is not a concern. See Figure 12.
-14-
VIII. ASSEMBLY (Continued)
Figure 12. Knife setting gauge.
G1182 6" Heavy-Duty Jointer