Table of Contents
Advertisement
FEATURES & CONTROLS
Main Features
MT#2—Used for quick setups by placing a
1.
dead center into the taper and aligning cen-
ters, picking up hole centers, ect and just
general machining operations.
2.
Rotary Table Lock—Used during milling
operations to lock the table solid. This fea-
ture keeps the stresses of the milling opera-
tions off of the wormgear to extend the life of
the rotary table and ensure that accuracy is
not compromised. Simply tighten the handles
to lock the table.
-8-
5
2
3
4
Figure 3. Main view of rotary table features .
1
Free Wheeling—This is a convience feature
3.
which allows the operator to rotate the table
by hand and not having to turn the crank
handle. just loosen the lock handle (#3) and
rotate the adjustment ring (#6) C.W. By rotat-
ing the adjustment ring, this disengages the
wormgear and allows the table to rotate.
Vernier Scale—Allows precise rotary move-
4.
ments. The vernier scale allows graduations
of 20" seconds.
Gross Scale—This scale will allow you
5.
keep track of where the rotary table is going
and where its been. The scale reads from 0˚-
360˚ in one degree graduations.
G1049 6" Combination Rotary Table
2
Advertisement
Table of Contents
