Table of Contents
Advertisement
About this Section
The purpose of this section is to guide you
through the required steps to get your machine
out of its packaging and into operating condition.
Unpacking
The Model G1049 6" Combination Rotary Table
was carefully packed when it left our warehouse.
If you discover the machine is damaged after you
have signed for delivery, please immediately call
Customer Service at (570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
-4-
SECTION 3: SET UP
This
equipment
sents serious injury haz-
ards to untrained users.
Read through this entire
manual to become famil-
iar with the controls and
operations before using
the equipment
Wear safety glasses dur-
ing the entire setup
process!
Piece Inventory
After all the parts have been removed from
the box, you should have:
6" Combination Rotary Table
•
•
Handwheel Crank Handle
•
Handwheel
pre-
In the event that any non-proprietary parts are
missing (e.g. nuts or washers), we would be glad
to replace them, or for the sake of expediency,
replacements can be obtained at your local hard-
ware store.
Figure 1. Piece inventory from packing box.
G1049 6" Combination Rotary Table
Advertisement
Table of Contents
