[A] Stainless Steel Exterior; [B] Storage Bin And Scoop; [C] Air Filter (Air-Cooled Model Only); [D] Condenser (Air-Cooled Model Only) - Hoshizaki KMD-270AWA Service Manual

[a] STAINLESS STEEL EXTERIOR

To prevent corrosion, wipe the exterior occasionally with a clean, soft cloth. Use a damp
cloth containing a neutral cleaner to wipe off oil or dirt build up.

[b] STORAGE BIN AND SCOOP

* Wash your hands before removing ice. Use the plastic scoop provided (bin accessory).
* The storage bin/dispenser unit is for ice use only. Do not store anything else in the storage
bin/dispenser unit.
* Clean the scoop and the storage bin/dispenser unit liner using a neutral cleaner. Rinse
thoroughly after cleaning.
[c] AIR FILTERS (AIR-COOLED MODEL ONLY)
Plastic mesh air filters remove dirt and dust from the air, and keep the condenser from
getting clogged. As the filters get clogged, the icemaker's performance will be reduced.
Check the filters at least twice a month. When clogged, use warm water and a neutral
cleaner to wash the filters.

[d] CONDENSER (AIR-COOLED MODEL ONLY)

Check the condenser once a year, and clean if required by using a brush or vacuum cleaner.
More frequent cleaning may be required depending on the location.

3. PREPARING THE ICEMAKER FOR LONG STORAGE

When the icemaker is not used for two or three days, it is sufficient to only move the control
switch to the "OFF" position, unless the icemaker will be at sub-freezing temperatures.
1. On water-cooled model only, first remove the water from the water-cooled
condenser:
1) Turn off the power supply and remove the front panel.
59