Table of Contents
Advertisement
2. MAINTENANCE
This icemaker must be maintained individually, referring to the instruction
manual and labels provided with the icemaker.
[a] STAINLESS STEEL EXTERIOR
To prevent corrosion, wipe the exterior occasionally with a clean, soft cloth. Use a damp
cloth containing a neutral cleaner to wipe off oil or dirt build up.
[b] STORAGE BIN AND SCOOP
* Wash your hands before removing ice. Use the plastic scoop provided (bin accessory).
* The storage bin/dispenser unit is for ice use only. Do not store anything else in the storage
bin/dispenser unit.
* Clean the scoop and the storage bin/dispenser unit liner using a neutral cleaner. Rinse
thoroughly after cleaning.
[c] AIR FILTERS (AIR-COOLED MODEL ONLY)
Plastic mesh air filters remove dirt and dust from the air, and keep the condenser from
getting clogged. As the filters get clogged, the icemaker's performance will be reduced.
Check the filters at least twice a month. When clogged, use warm water and a neutral
cleaner to wash the filters.
[d] CONDENSER (AIR-COOLED MODEL ONLY)
Check the condenser once a year, and clean if required by using high pressure air, nitrogen
or vacuum cleaner. Do not use a brush when cleaning. It may cause damage to the
condenser fin. More frequent cleaning may be required depending on the location.
3. PREPARING THE ICEMAKER FOR LONG STORAGE
1. When shutting off the icemaker for an extended time, drain out all water from
the water line and remove the ice from the storage bin/dispenser unit. The
storage bin/dispenser unit should be cleaned and dried. Drain the icemaker
to prevent damage to the water supply line at sub-freezing temperatures,
using air or carbon dioxide. Shut off the icemaker until the proper ambient
temperature is resumed.
2. To prevent damage to the water pump, do not leave the control switch in the
"SERVICE" position for extended periods of time when the water tank is
empty.
IMPORTANT
CAUTION
56
Advertisement
Table of Contents
