Table of Contents
Advertisement
Internal Logging (cont'd)
Logger Features
Refer to the illustration under Setting the Sample Rate.
• MEMORY Shows the total amount of memory in the meter.
• REMAINING Shows the amount of memory left in the meter.
• TIME OF METER Shows the date and time in the meter at the time Logger was opened.
Click to update the date and time.
• ID CODE Shows the code you assigned in the meter.
• SAMPLING Shows the sampling rate in the meter.
• NUMBER OF SETS Click to show the number of data sets in the meter.
• TIME OF RECORDING Displays a list of the data sets in the meter.
• NUMBERS OF REC Shows the number of records in the selected set.
• SHOW DATA Click to display the data in the selected set. The data can be saved to a file,
printed, or graphed.
Assigning an ID Code to the Meter
ID codes are loaded into the meter to help keep track of recordings. The ID code is visible on
the Logger dialog box but is not stored with the recorded data.
1.
On the Logger dialog box, select the ID number under ID CODE.
2.
Type in a number between 0 and 65,535.
3.
Click ID CODE. The code is uploaded to the meter.
SML-200
17
Advertisement
Table of Contents
