Table of Contents
Advertisement
User's Manual
155
DataScout 10G
Auto Mode
If this option was purchased press the Auto button (upper left of the screen) to Auto de-
tect the cable is plugged into the test set. The test set will configure for what cable is
detected.
Other Features
Up/Down buttons
These buttons increase or decrease the internal frequency by 100Hz steps.
Invert button
This button inverts the BERT pattern that is selected.
Bi-Directional loopback button
This button is useful for checking cable connections, press the Bi-Directional Loopback
to loop toward the test set and towards the DTE (DCE mode) or DCE (DTE mode).
Advertisement
Table of Contents
