Using The Features - Greenlee PDMM-10 Instruction Manual

Identification
1. Digital display (LCD)
2. Function selector
3. Power and measurement range selector
4. Test leads with probes

Using the Features

Power and measurement range selector: Slide the selector up to
turn unit on. Line the selector up with desired settings. Always
start with highest setting. Slide the selector down to turn unit off.
Function selector: Slide the selector side to side to set the proper
position prior to connecting the test probes. Disconnect the
probes from the circuit or component before switching to a new
function.
Test leads: Red probe polarity is positive. Remove test lead caps
to perform tests.
1
2
3
PDMM-10
4
7