Special Functions - Chauvet Legend 1200E WASH User Manual

Color
Shutter & Dimmer
Zoom
All

Special Functions

Fixture Maintenance
Timers
Factory Default
Legend™ 1200E Wash User Manual Rev. 02e
Continued from previous page
This option resets the color wheels to their corresponding home positions.
1) Select Color.
2) Select Yes (reset) or No (exit without resetting).
2) Press <ENTER>.
The color wheels will move to their positions (this movement may be very small).
This option resets the shutter and dimmer to their corresponding home positions.
1) Select Shutter & Dimmer.
2) Select Yes (reset) or No (exit without resetting).
2) Press <ENTER>.
The shutter and dimmer will move to their positions (this movement may be very small).
This option resets the zoom to its corresponding home positions.
1) Select Zoom.
2) Select Yes (reset) or No (exit without resetting).
2) Press <ENTER>.
The zoom motor will move to its home position (this movement may be very small).
This option resets all the motors to their corresponding home positions.
1) Select All.
2) Select Yes (reset) or No (exit without resetting).
2) Press <ENTER>.
All the motors will move to their home positions (this movement may be very small).
The Special Functions section comprises the maintenance timer options and the factory
default option. To access this section, do the following:
1) Press <MENU>.
2) Select Special Functions.
3) Select the corresponding function as indicated below.
4) Press <MENU> to exit once you are done with this section.
This fixture has a built-in timer to remind the operator that is time for the fixture's routine
maintenance. When the preset time elapses, the warning icon shows on the LCD.
1) Select Fixture Maintenance.
2) To change the maintenance interval timer,
a) Select Interval.
b) Select the new interval (in hours).
c) Press <MENU>.
3) To reset the remaining time counter,
a) Select Remain Time.
b) Select Reset Time (reset the timer) or Exit (exit without resetting).
c) Press <MENU>.
If you want to default the fixture to its factory configuration, follow the steps bellow:
1) Select Factory Settings.
3) Select Yes (default fixture) or No (exit without defaulting).
4) Press <ENTER>.
•
The above operation will default all the fixture's parameters to their original
factory configuration values.
•
Defaulting the fixture does not affect the home position settings.
Operation
-17-