Operating Instructions; Control Panel; Control Panel Functions; Applying Changes To Functions (Quick Instructions) - Chauvet Q-Spot 575 User Manual

O
PERATING

Control Panel

Please be aware that after 12 seconds of no control panel activity the LEDs in the display will turn off.
Press any button to initialize.
On the control panel you can set the DMX address, set the fixture to Master/Slave mode, reset the
fixture and change fixture personality trait.

Control Panel Functions

F
UNCTION
PAN
Tilt
Addr
rESt
COLI
RUN
LAMP
VEr
HEAt
LA.Er

Applying changes to Functions (Quick Instructions)

Unless other wise stated changes in the control panel can be applied in the following manner.
1. Press [MODE] button repeatedly until the display reads the menu function you wish to change as
illustrated in the table above in section "Control Panel Functions"
2. Press the [ENTER] key to confirm the selection
3. Press the [Up] or [Down] button to toggle between the options available for that particular menu
function.
4. Press the [Enter] button to store your selection.
Q-Spot 575 User Manual
I
NSTRUCTIONS
[MODE] Confirms selection
[ENTER] Access to main menu
[Up] Toggle menu items in a forward direction
[Down] Toggle menu items in a reverse direction
O
PTIONS
NO/YES Pan Invert
NO/YES Tilt Invert
A001 DMX Channel Address
YES Fixture reset
NO/YES Linear progression of color wheel (split colors)
dn.Co. DMX-512 Mode
Pr6.1 Automatic Program 1 (when mounted upside down)
Pr6.2 Automatic Program 2 (when floor positioned)
SLAE Slave Mode
Sou.1 Music Program 1 (when mounted upside down)
Sou.2 Music Program 2 (when floor positioned)
ON Lamp on
OFF Lamp off
1.X Software version
Status Too hot to strike or no lamp
Status Lamp error
N
OTES
9
2006-05-17/13:25