Menu Functions
M
O
ENU
PTION
1-Address
2-Reset
3-Operation
4-Display
5-Pan
6-Tilt
7-Color
8-Channels
9-Info
User Configurations
T O SET T H E P A N T O I N V ER T ING OR NON- IN VERT ING:
1)
Press the <MENU> button.
2)
Scroll up or down until <5-Pan> is displayed.
3)
Press <ENTER>.
4)
Press up or down until <select: Normal> or <select: Reverse> is displayed.
5)
Press <ENTER>.
T O SET THE T I LT TO I N V ERTING OR NON- IN VERTING:
1)
Press the <MENU> button.
2)
Scroll up or down until <6-Tilt> is displayed.
3)
Press <ENTER>.
4)
Press up or down until <select: Normal> or <select: Reverse> is displayed.
5)
Press <ENTER>.
TO CHANGE TH E COLOR WH EEL SETTING:
1)
Press the <MENU> button.
2)
Scroll up or down until <7-Color> is displayed.
3)
Press <ENTER>.
4)
Press up or down until <select: Step> or <select: Linear> is displayed. "Step" snaps to colors,
"Linear" allows split colors.
5)
Press <ENTER>.
Q-Spot 200 User Manual
D
ESCRIPTION
Set the DMX address for the fixture.
Reset the fixture.
Select operating mode: DMX, Auto 1, Auto 2, Music 1, Music 2,
Slave, or Random. Auto and Music modes set the fixture to
Master/Stand-alone mode.
Change whether display backlight turns off after 60 seconds or
not.
Pan normal or inverted.
Tilt normal or inverted.
Set the color wheel to linear control (split colors), or snap
to color.
Set the fixture to 12 channel (Advanced mode) or 9 channel
(Basic mode) operation.
Software version
16
9/5/2007 2:59 PM