Table of Contents
Advertisement
O
PERATING
Control Panel
On the control panel you can set the DMX address, set the fixture to Master/Slave mode, reset the
fixture and change fixture personality trait.
Control Panel
Enter
Choose
Control Panel Functions
F
UNCTION
-y: Activates setting
-n: Disables, skips or selects alternative setting
Applying changes to Functions (Quick Instructions)
Unless other wise stated changes in the control panel can be applied in the following manner.
1. Press [Choose] button repeatedly until the display reads the menu function you wish to change as
illustrated in the table above in section "Control Panel Functions"
2. The display will read the previously stored settings for the desired function, for example, either
with a "-y" or a "-n" as in "PA-y or PA-n".
3. Press the [Up] or [Down] button to toggle between either the "-y" or "-n" selection for that
particular menu function.
4. Press the [Enter] button to store your selection. The display will read "PASS" to confirm your
selection
Q-Spot & Q-Spot 150 User Manual
I
NSTRUCTIONS
[Enter] Confirms selection
[Choose] Access to main menu
[Up] Toggle menu items in a forward direction
[Down] Toggle menu items in a reverse direction
Up
Down
O
PTIONS
Default Personality (6ch)
16 bit Personality (9ch)
/
16 bit Personality Alternate (9ch)
/
8 bit Personality with Speed Control (7ch)
-
Function reserved
/
Pan invert
/
Tilt invert
/
Fixture reset
/
Activate music trigger
/
Stand Alone mode
/
Master/Slave mode
/
Reset all functions except Pan & Tilt
/
Display invert
~
DMX channel addressing
~
Displays fixture hours
N
OTES
10
2005-11-15/13:11
Advertisement
Table of Contents
