Control Panel Functions; Program Options - Chauvet Q-Wash 575 User Manual

Control Panel Functions

F
UNCTION

Program Options

M
ENU
O
PTION
Q-Wash 575 User Manual
O N
PTIONS OTES
NO/YES Pan Invert (Yes or No)
NO/YES Tilt Invert (Yes or No)
001-497 DMX Channel Address
YES Fixture reset
dn.Co. DMX-512 Mode
Pr6.1 Automatic Program 1 (when mounted upside down)
Pr6.2 Automatic Program 2 (when floor positioned)
SLAE Slave Mode
Sou.1 Music Program 1 (when mounted upside down)
Sou.2 Music Program 2 (when floor positioned)
ON Lamp on
OFF Lamp off
X.X Software version
Status Too hot to strike, or no lamp
Status Lamp error
D
ESCRIPTION
Automatic – Master Unit (Ceiling-mounted):
Master status for Master-Slave operation and the built in
programs will be triggered automatically. No data link is
required; all fixtures can be set to this mode for Stand-alone
operation.
Automatic – Master Unit (Floor-mounted):
Master status for Master-Slave operation and the built in
programs will be triggered automatically. No data link is
required; all fixtures can be set to this mode for Stand-alone
operation.
Slave Unit: Sets the fixture to run in sync with the Master.
You must set the first fixture in the data link to "Master"
otherwise nothing will happen.
Sound Active – Master Unit (Ceiling-mounted):
to Master status for Master-Slave operation and the built in
programs will be triggered by the sound. No data link is
required; all fixtures can be set to this mode for Stand-alone
operation.
Sound Active – Master Unit (Floor-mounted):
Master status for Master-Slave operation and the built in
programs will be triggered by the sound. No data link is
required; all fixtures can be set to this mode for Stand-alone
operation.
DMX: The fixture will be controlled by a DMX signal coming from
a DMX controller. The starting address must be selected.
13
Sets the fixture to
Sets the fixture to
Sets the fixture
Sets the fixture to
2007-08-03/09:10