1. B EFORE What is included 1 x Q-Wash 575™ HMI 575W Lamp Power Cord Warranty Card User Manual Unpacking Instructions Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling.
Caution! There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact CHAUVET at: 954-929-1115. Q-Wash 575 User Manual Chauvet Lighting...
Product Overview Control Panel DMX Input Connector Power Switch Q-Wash 575 User Manual Carrying Handle Output Connector Power Connector & Fuse Holder Head Yoke Base Access Plate to Multitap Transformer 8/3/2007 9:10:00 AM...
Gently push reflector to head. Lower fa n towards lamp and tighten the two thumbscrews. Replace top cover. Q-Wash 575 User Manual Figure A ws indicated in wards the back of Figure B t be facing directly up Figure C...
Maximum recommended number of fixtures on a serial data link: 32 fixtures Data Cabling To link fixtures together you must obtain data cables. You can purchase CHAUVET-certified DMX cables directly from a dealer/distributor or construct your own cable. If you choose to create your own cable please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic interference.
3-PIN TO 5- PIN CON VE R SION CHAR T If you use a controller with a 5 Note! CHAUVET Model No: DMX5M, or DMX5F. The chart below details a proper cable conversion: IN TO ONVERSION Ground/Shield...
Never mount in places where the fixture will be exposed to rain, high humidity, extreme temperature changes or restricted ventilation. • A minimum of two mounting points must be used for this fixture. Q-Wash 575 User Manual Note! Clamp is sold separately. Hanging Clamp...
Use the navigate the menu options. Press the <ENTER> button to access the m displayed or to enable a menu option. To return to the previous option value, press the <MODE> button. Q-Wash 575 User Manual STRUCTIONS Function for the <UP>...
Stand-alone operation. DMX: The fixture will be controlled by a DMX signal coming from a DMX controller. The starting address must be selected. Q-Wash 575 User Manual OTES Pan Invert (Yes or No) Tilt Invert (Yes or No)
The unit will react to the low frequencies of music via the internal microphone in Sound Active mode, or the unit will auto change in Auto Mode. Q-Wash 575 User Manual OR NON- IN VERT IN is displayed.
<UP> and <D button. DMX Channel Values HANNEL ALUE Q-Wash 575 User Manual N> buttons to scroll through until the desired mode is displa is auto mode ceiling-mounted; is sound-active ceiling-mounted; is displayed on the slave units. Use the <UP> and is displayed and press the <ENTER>...
Page 16
Q-Wash 575 User Manual Blue Green Color Correction: 6000K Color Correction: 3200K Rainbow Effect (Slow > fast) No Function Reverse Rainbow Effect (Slow > Fast) Cyan (0 – 100%) Magenta (0 – 100%) Yellow (0 – 100%) CMY Speed (Fast > Slow)
Chauvet lig ctions do no er the fixtu If you still have a probl Support at the location on the next page. Q-Wash 575 User Manual Solution(s) placed on de vice peed adjustment fuse. (internal and/or external) ettings for correct addressing...
Connect fixtures wisted pair cable with three pin XLR in 3 is Data positive (S+). CHAUVET g frequency. As a general rule, fixtures should sed mechanic ts. Clean all glass when the fix nd a soft lint free cotton cloth or lens tissue.