Safety Notes - Chauvet Legend 1200E WASH User Manual

Chauvet washer user manual
Hide thumbs Also See for Legend 1200E WASH:
Table of Contents

Advertisement

Before You Begin

Safety Notes

Personal Safety
Mounting and Rigging
Power and Wiring
Operation
-2-
Please read the following notes carefully because they include important safety
information about the installation, usage, and maintenance of this product.
It is important to read all these notes before starting to work with this product.
There are no user serviceable parts inside this product. Any reference to
servicing it you may find from now on in this User Manual will only apply to
properly CHAUVET® certified technicians. Do not open the housing or attempt
any repairs unless you are one of them.
Please refer to all applicable local codes and regulations for the proper
installation of this product.
Keep this manual for future consultation. If you sell this product to another user,
make sure that they also receive this manual.
Avoid direct eye exposure to the light source while the fixture is on.
Always disconnect this product from its power source before servicing.
Lamp explosion hazard!
Do not open the lamp cover within five minutes of having
turned off the fixture.
The bulb remains hot for a long time after turn off. Never touch the bulb
barehanded and always handle it by its ceramic base.
Always connect this product to a grounded circuit to avoid the risk of electrocution.
Do not touch this product's housing when operating because it may be very hot.
This product is for indoor use only! To prevent risk of fire or shock, do not expose
this product to rain or moisture.
Make sure there are no flammable materials close to this product while operating.
When hanging this product, always secure it to a fastening device using a safety
chain/cable (not provided).
Do not carry this fixture from the head; use the handles instead.
Always make sure that you are connecting this product to the proper voltage, as
per the specifications in this manual or on the product's sticker.
Never connect this product to a dimmer pack or rheostat.
Make sure the product's housing or power cable are not cracked, crimped, or
damaged.
Never disconnect this product by pulling or tugging on the power cable.
Do not operate this fixture if you see damage on the housing, lenses, ultraviolet
filter, or cables; have the damaged parts replaced by an authorized technician at
once.
Do not cover the ventilation slots when the fixture is operating to avoid internal
overheating.
Do not aim this fixture toward the Sun. Otherwise, the lenses could concentrate the
solar energy and cause internal overheating.
The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate this
product at a higher temperature.
In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your Legend™ 1200E Wash may require service, please
contact CHAUVET® Technical Support.
Legend™ 1200E Wash User Manual Rev. 02e

Advertisement

Table of Contents
loading

Table of Contents