Operation - Greenlee CCCX Instruction Manual

Operation

Electric shock hazard:
This tool is not insulated. When
using this unit on or near energized
electrical lines, use proper personal
protective equipment.
Failure to observe this warning could
result in severe injury or death.
Wear eye protection when operating
or servicing this tool.
Failure to wear eye protection could
result in serious eye injury from
flying debris or hydraulic oil.
Skin injection hazard:
Do not use hands to check for oil
leaks. Oil under pressure easily
punctures skin. If injured, seek
medical attention immediately to
remove oil.
Failure to observe this warning could
result in serious injury, gangrene, or
death.
Greenlee / A Textron Company
CCCX and CCCXC Tools
Pinch points:
Keep hands away from the tool head
when in use.
Failure to observe this warning could
result in severe injury or death.
• Do not operate tool without adapters. Damage
to the ram, tool head, or accessories may result.
• This tool is not designed for continuous use.
After 30 to 40 cycles, allow the tool to cool for
15 minutes.
• Do not place the tool in a vise. This tool is
designed for hand-held operation.
• Ensure that all bystanders are away from the
work area when operating the tool.
• Ensure that the work area is clean, dry,
uncluttered, and well-lit.
• Use this tool for the manufacturer's intended
purpose only.
Failure to observe these precautions may result in
injury or property damage.
7
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070