Table of Contents
Advertisement
Appliance settings
Child lock
A p p l i a n c e s e t t i n g s
You can secure the appliance against inadvertent
changing of the set functions. To do this, activate the
Child lock after cycle start.
To Activate/Deactivate, press Finish in
approximately 3 seconds. In the display field, you will see
the
symbol light indicating the Child lock is active.
D
NOTICE: The Child lock will remain activated after the
end of the cycle. Even switching the appliance off and on
will not deactivate the Child lock. You must deactivate
Child lock and, if necessary, activate it again.
Activating setting mode
In order to change the default appliance settings
described below, you will first need to enter or activate
setting mode.
To enter or activate the setting mode:
Switch on the appliance. The indicator lamp of the
1.
program on position 1 (
Press and hold Dryness Level button and, at the
2.
same time, turn the program selector to position 2
(
).
0
Release Dryness Level button.
3.
The setting mode is now activated.
Changing the audible signal volume
You can adjust the volume of audible notification signals
(that indicate that a program has ended, for example)
and audible button signals by turning the program
selector to the following positions:
2 (
): Audible notification signal volume
0
▯
selectable values:
= quiet,
‚
= very loud
3 (
): Audible button signal volume
8
▯
selectable values:
‹
= off,
loud,
= very loud
...
Turn the program selector to the required position.
1.
Use the Finish in
N
2.
you require.
38
and
M
) lights up.
(
= medium,
= loud,
ƒ
„
‚
= quiet,
ƒ
= medium,
or
button to set the volume
M
Switching the automatic switch-off function on/off
If the appliance is not used for an extended period, it
may automatically switch itself off until a program starts
or when a program has ended in order to save energy. It
for
can be switched back on again at any time by pressing
N
the power button
You can switch the appliance's automatic switch-off
function on or off as follows:
Turn the program selector to position 4 (
1.
Use the Finish in
2.
appliance's automatic switch-off function on (
(
).
‹""
NOTICE: The automatic switch-off function cannot be
activated if Wi-Fi is activated.
Exiting setting mode
Once you have applied all the settings, press the power
button
#
to switch off the appliance.
The settings you have selected will be saved and will
take effect the next time the appliance is switched on.
...
„
=
.
#
or
button to switch the
N
M
).
@
) or off
‹Ÿ
Advertisement
Table of Contents
