Table of Contents
Advertisement
Remove screws from the hook insert and then remove
5.
it from the door.
Follow the instructions at images below to unlock the
6.
door ring from the door body.
Separate the ring from the door body and rotate the
7.
ring 180° from it's original position. Fit the ring back to
the door body as shown below.
Follow the instructions of the images below to lock the
8.
door ring.
Place the hook insert in position adjacent to the
9.
handle slots/openings and the hinge insert in the
opposite position as shown. Reinstall the original
screws.
Remove screws from the door latch cover and then
10.
remove it from the dryer housing.
Remove the door latch from the dryer housing.
11.
21
Advertisement
Table of Contents
