Table of Contents
Advertisement
en Home Connect
16.2 Setting up Home Con-
nect
Requirements
¡ The Home Connect app has been
installed on your mobile device.
¡ Wi-Fi has been activated on the
router.
¡ The appliance is receiving signals
from the WLAN home network (Wi-
Fi) at its installation location.
Press and hold
1.
έναρξη for approx. 3 seconds.
Follow the instructions in the
2.
Home Connect app.
16.3 Home Connect menu
The Home Connect menu contains
all of the Home Connect settings.
Calling up the Home Connect
menu
Press and hold
▶
έναρξη for at least 3 seconds.
a The display shows the first setting
of the Home Connect menu.
Navigating in the Home Connect
menu
Briefly press
▶
έναρξη until the display shows
the required setting.
Exiting the Home Connect menu
Press and hold
▶
έναρξη for at least 3 seconds.
16.4 Activating Wi-Fi on the
appliance
Requirements
¡ The Home Connect menu is called
up.
→ "Calling up the Home Connect
menu", Page 44
¡ The display shows "oFF".
44
Απομακρ.
Απομακρ.
Απομακρ.
Απομακρ.
Press
to change the setting.
▶
a The display shows "on" if the Wi-Fi
is activated.
Note: If the Wi-Fi is activated, the dis-
play alternately shows "on" and the
signal strength of the Wi-Fi connec-
tion.
16.5 Deactivating Wi-Fi on the
appliance
Requirements
¡ The Home Connect menu is called
up.
→ "Calling up the Home Connect
menu", Page 44
¡ The display shows "on".
Press
to change the setting.
▶
a The display shows "oFF" if the Wi-
Fi is deactivated.
16.6 Resetting the appliance
network settings
Requirements
¡ The Home Connect menu is called
up.
→ "Calling up the Home Connect
menu", Page 44
¡ The display shows "rES" .
Press and hold
▶
3 seconds.
a The network settings are reset.
16.7 Remote start
Enable the appliance for remote start
via the Home Connect app.
Note
Remote start is deactivated for safety
reasons in the following
circumstances:
¡ The appliance door is opened.
is pressed.
¡
Απομακρ. έναρξη is pressed.
¡
¡ Following a power cut.
for at least
Advertisement
Table of Contents
