N
ETWORK
LAN
Wireless Router - In this mode, the device enables multiple users to
◆
share a single Internet connection through a DSL/cable modem. All
wireless client users share the same Internet connection through the
Ethernet WAN port as LAN port users.
Wireless Client Router - In this mode, the device enables multiple
◆
users to share a single Internet connection from a wireless Internet
service provider (WISP). The LAN port devices share the WISP
connection, where the wireless port operates as a WAN port in wireless
client mode.
There are three submenus under the Network menu (shown in
LAN,WAN and MAC Clone. Click any of them to configure the
corresponding function.
Figure 33: The Network Menu
Choose menu "Network-> LAN", you can configure the IP parameters of
the LAN on the screen as below.
Figure 34: LAN
MAC Address - The physical address of the Router, as seen from the
◆
LAN. The value cannot be changed.
IP Address - Enter the IP address of your Router or reset it in dotted-
◆
decimal notation (factory default: 192.168.2.1).
Subnet Mask - An address code that determines the size of the
◆
network. Normally use 255.255.255.0 as the subnet mask.
– 50 –
| Configuring the Router
C
4
HAPTER
Figure
Network
33):