Determine Vent Setup In The Combination Venting Unit - Superior Fireplaces DRT2040REN-C Installation And Operation Instruction Manual

Innovative Hearth Products
DRT2000-C Series Direct-Vent Gas Fireplaces
Determining Vent Setup in the Combination Venting Unit
4.
Combination venting units are shipped with round outer flue covers and inner flue cover plates installed that will require removal before connecting the vent pipe. If
you require a rear vented unit, remove the round outer rear flue cover (2 screws, Figure 9A) and the inner flue cover plate (4 screws, Figure 9B). If you require a top
vented unit, remove the round outer top flue cover (2 screws, Figure 9A) and the inner top flue cover plate (2 screws, Figure 9B).
NOTE: It may be necessary to remove the upper lintel and baffle to access the inner flue cover plates (3 screws).
Figure 9A
Outer Top Flue Cover
20
(for 45" models only)
Figure 9B
Inner Top Flue
Cover Plate
Inner Rear Flue Cover Plate
Outer Rear
Flue Cover
Installation
900948-00E, 07/2020