Superior Fireplaces DRT2040REN-C Installation And Operation Instruction Manual page 56

Innovative Hearth Products
DRT2000-C Series Direct-Vent Gas Fireplaces
Install the Logs and Glowing Embers
• Turn OFF all gas and electricity to the appliance before installing the embers, and logs.
• Do NOT install the logs until the appliance has been completely installed, the gas line connected and
tested for leaks, and the initial burner operation has been confirmed.
• Use of an unapproved log set in the fireplace will void the warranty and will result in incomplete
combustion, sooting, and poor flame quality.
• Logs get very hot and remain hot for up to one hour after the gas supply is turned OFF. Handle the logs
only when cool.
• This appliance is not designed to burn wood. Any attempt to do so could cause irreparable damage to
appliance and prove hazardous.
• If the logs are not installed according to these instructions, improper combustion could occur. This could
result in the excessive production of soot and/or the colorless, odorless, toxic gas carbon monoxide (CO).
NOTE: It is important to ensure proper log placement per the manual when installing these units. Verify pilot
flame is not obstructed. See Verifying Appliance Operation on Pages 40-41.
56
WARNING
Operation
900948-00E, 07/2020