Superior Fireplaces DRT2040REN-C Installation And Operation Instruction Manual page 57

Innovative Hearth Products
DRT2000-C Series Direct-Vent Gas Fireplaces
Installing the DRT2000-C 35 Series Log Set
The logs have notches/tabs to assist proper positioning. Upper logs rest on lower logs via notches/tabs. Proper log placement is
critical to prevent sooting. Place the logs in the gaps between flame peaks, so they do not impinge the flames. Follow the log placement
instructions precisely.
NOTE: Do not cover the burner ports.
Table 30 - Log Set
I.D.
Description
No.
1 Front Left Log
2 Front Right Log
3 Back Left Log
4 Back Right Log
5 Twig Log
1. If necessary, remove the glass door (Pages 63-64). Locate the placement tabs (Figure 40).
2. Bend up the log placement tabs (Figure 40).
3. Install the front left log (1) (Figure 41).
Figure 40 - Locate the log placement tabs
Tabs for
Log #3
c
b
a
Tabs for
Log #1
4. Install front right log (2) on two tabs (Figure 42).
5. Install back left log (3) on two tabs (Figure 43).
Figure 42 - Place right front log (2)
1
Top View
3
4
5
2
1
Tab for
Log #4
d
e
f
Tabs for
Log #2
Landing for
Twig (5)
Fits over Tab "g"
Fits over Tab "f "
(Figure 40)
(Figure 40)
Do not use this hole
Bottom View
Catalog number for the entire set: See Page 77.
5
1
Figure 41 - Place front left log (1)
1
g
Top View
Figure 43 - Place back left log (3)
Landing for
Twig (5)
2
1
Front View
900948-00E, 07/2020
3
4
2
Fits over Tab "a"
(Figure 40)
Fits over Tab "b"
(Figure 40)
Do not use
Bottom View
3
2
Fits over Tab "c" Fits over Tab "d"
(Figure 40) (Figure 40)
Bottom View
Operation
this hole
57