Hitron CGN01A User Manual page 19

Table 3: LEDs
USB Off
Green, steady
LAN/ Front Off
Green, blinking
Green, steady
LAN/ Back Off
Green, blinking
Green, steady
Blue, blinking
Blue, steady
Status Green, Blinking
Green
US Green, blinking
Green, steady
Blue, steady
Off
19 19
HITRON CGN USER'S GUIDE
The CGN is not linked up USB.
The CGN has successfully linked up USB.
No device is connected to the LAN port.
A device is connected to the LAN port via a
Ethernet link, and is transmitting or receiving data.
A device has successfully connected to the LAN
port via a Ethernet link.
No device is connected to the relevant LAN port.
A device is connected to the relevant LAN port via a
Fast Ethernet (10/100Mbps) link, and is transmitting
or receiving data.
A device is connected to the relevant LAN port via a
Fast Ethernet (10/100Mbps) link, but is not
transmitting or receiving data.
A device is connected to the relevant LAN port via a
Gigabit Ethernet (1000Mbps) link, and is
transmitting or receiving data.
A device is connected to the relevant LAN port via a
Gigabit Ethernet (1000Mbps) link, but is not
transmitting or receiving data.
The CGN's cable modem is registering with the
service provider's CMTS.
The CGN's cable modem has successfully
registered with the service provider and is ready for
data transfer.
The CGN is searching for an upstream frequency
on the CABLE connection.
The CGN has successfully located and locked onto
an upstream frequency on the CABLE connection.
The CGN is engaged in channel bonding on the
upstream connection.
There is no upstream activity on the CABLE
connection.
Version 2.0, February 2012. Copyright
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
2012 Hitron Technologies
INTRODUCTION