Canon imageFORMULA DR-C225 II User Manual page 57

[Enable] [Disable] button
This button is used to toggle between Enable/Disable modes for the plugin
selected from the plugin list.
If you click the [Disable] button, the following dialog is displayed.
[Maintenance] Tab
On the [Maintenance] tab, you can configure the log settings for the
maintenance of CaptureOnTouch and initialize the settings.
Back Up / Restore
Use the [Back Up] and [Restore] buttons to back up the configuration file
(settings, registered jobs, etc.) of CaptureOnTouch and restore the
settings from the backup data.
[Back Up] button
Back up the settings of CaptureOnTouch to a backup file (*.cot). You can
store the initial settings of CaptureOnTouch by performing a backup before
you first use CaptureOnTouch.
[Restore] button
Restore the settings from the backup file.
When using multiple computers, you can back up the environmental
settings of one computer and then perform a restore on the other
computers so that all of the computers have the same settings.
Log settings
The Log file settings screen opens when you click the [Settings] button.
Select the type of log file.
If you click the [Execute] button, the [Save File] dialog is displayed.
[Initialize]
A confirmation dialog box appears when you click the [Initialize] button.
All CaptureOnTouch data are deleted and returned to the default settings.
Click [Preferences] from the [CaptureOnTouch DR-C225] menu while the
main screen of CaptureOnTouch is displayed.
The following describes the setting items of each tab displayed in the
[Environmental Settings] dialog box.
57