Table of Contents
Advertisement
Quick Links
Chapter 1 Introduction
Chapter 2 Important Safety Instructions
Chapter 3 Before Using the Scanner
Chapter 4 Placing Documents
Chapter 5 Scanning with CaptureOnTouch
Chapter 6 Setting the Scanner Driver
Chapter 7 Special Scanning
Chapter 8 Regular Maintenance
Chapter 9 Replacing Consumable Parts
Chapter 10 Uninstalling the Software
Chapter 11 Troubleshooting
Chapter 12 Appendix
6T3-0030-05E
1
Advertisement
Chapters
Table of Contents
Related Manuals for Canon imageFORMULA DR-C225 2
Summary of Contents for Canon imageFORMULA DR-C225 2
- Page 1 Chapter 1 Introduction Chapter 2 Important Safety Instructions Chapter 3 Before Using the Scanner Chapter 4 Placing Documents Chapter 5 Scanning with CaptureOnTouch Chapter 6 Setting the Scanner Driver Chapter 7 Special Scanning Chapter 8 Regular Maintenance Chapter 9 Replacing Consumable Parts Chapter 10 Uninstalling the Software Chapter 11 Troubleshooting Chapter 12 Appendix...
-
Page 2: Table Of Contents
###HOME > Chapter 1 Introduction > About This Manual### ###HOME > Chapter 1 Introduction### Manuals for the Scanner Thank you for purchasing the Canon imageFORMULA DR-C225 II/ C225W II Document Scanner. Documentation for this scanner consists of the following manuals. -
Page 3: Features Of The Scanner
Register Windows 8.1 at the following locations. Indicates operational requirements and restrictions. Be sure to read these items carefully to operate the machine correctly, and avoid damage to the machine. Indicates a clarification of an operation, or contains additional explanations for a procedure. Reading these notes is highly recommended. - Page 4 Color/Grayscale Support Text Enhancement Modes Documents can be scanned in 24-bit color or 256-level grayscale. The scanner is equipped with the Advanced Text Enhancement Mode (only for Windows), for enhancing the text of documents with dark or Supports a Variety of Scanning Modes ...
-
Page 5: Names And Functions Of Parts
Names and Functions of Parts Sleep Mode The scanner is designed to save energy by entering the sleep mode when it is not scanning documents. ###HOME > Chapter 1 Introduction > Names and Functions of Parts### Wi-Fi connectivity (DR-C225W II only) ... - Page 6 Back View (8) Start Button This starts scanning the document loaded in the document feed tray (9) Feed Selection Indicator This indicates the way documents are currently being fed in accordance with the position of the feed selection lever. Lever position Indicator color Upper (non separation feeding) White...
-
Page 7: Regulations
Canon U.S.A. Inc. radio frequency (RF) Exposure rules. This equipment has very low levels One Canon Park, Melville, NY 11747, U.S.A. of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed Tel. - Page 8 This is not an exhaustive list. (EEA: Norway, Iceland and Liechtenstein) Canon is not responsible for how this scanner is used by an individual. Please note that certain intellectual property is protected by copyright law, Fur EMVG...
-
Page 9: Trademarks
EXPECT AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION, ###HOME > Chapter 1 Introduction > Trademarks### THEREOF, WARRANTIES AS TO MARKETABILITY, Canon and the Canon logo are registered trademarks, of Canon Inc. MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OF in the United States and may also be trademarks or registered USE OR NON-INFRINGEMENT. -
Page 10: Installation Location
Chapter 2 Important Safety Installation Location Instructions ###HOME > Chapter 2 Important Safety Instructions > Installation Location### The performance of this scanner is affected by the environment in ###HOME > Chapter 2 Important Safety Instructions### which it is installed. Make sure that the location where the scanner is To ensure the safe operation of this scanner, be sure to read the safety installed meets the following environmental requirements. -
Page 11: Ac Adapter
Do not use an AC adapter other than the one provided with the scanner. Do not use the AC adapter provided with the scanner with other products. If you have any questions regarding the power supply, contact your local authorized Canon dealer or service representative for further information. -
Page 12: Handling
Handling power button to turn it OFF, and disconnect the power plug from the power outlet. Then, contact your local authorized Canon dealer or service representative to have the unit serviced. ###HOME > Chapter 2 Important Safety Instructions > Handling### ... -
Page 13: Disposal
Disposal Do not wear loose clothing or jewelry that may get caught in the scanner while you are using it. This may result in personal injury. Be extra careful of neckties and long hair. If anything becomes caught in ###HOME >... - Page 14 10.14 • macOS 10.15 This is the environment as of December 2019. For the latest software support information, go to the Products page on the Canon website. Other requirements • An ISIS-compatible application (Windows only) or a TWAIN- compatible application that is compatible with the above operating systems.
- Page 15 The power of the scanner can be turned ON and OFF with the power interfaces, even if present as standard equipment on the button on the front of the scanner. computer. For details, consult your local authorized Canon dealer. Make sure that the scanner and computer are connected properly.
- Page 16 Turning Off the Power Press and hold the power button until the indicator goes out. After turning the scanner off, wait at least 10 seconds before When the scanner is turned on for the first time, the balloon turning it back on. message shown below appears on the Windows task bar.
-
Page 17: Documents
Chapter 4 Placing Documents Documents ###HOME > Chapter 4 Placing Documents > Documents### ###HOME > Chapter 4 Placing Documents### The scanner can scan documents ranging in size from business This section describes how to load a document for scanning. cards to Legal/A4. The document sizes that this scanner can scan are shown below. - Page 18 Scanning the following types of documents can cause a paper jam or malfunction. To scan such a document, make a photocopy of the document and then scan the photocopy. A document must meet the following criteria to be scannable: Wrinkled or creased Carbon paper When scanning multiple documents of different sizes, place ...
-
Page 19: Switching The Feed And Eject Methods
Switching the Feed and Eject Methods Placing Documents for Standard Feeding ###HOME > Chapter 4 Placing Documents > Switching the Feed and ###HOME > Chapter 4 Placing Documents > Placing Documents for Eject Methods### Standard Feeding### Use the two levers on the scanner to switch the feed and eject Ordinarily, standard feeding should be used when scanning multiple methods based on the type of document you are scanning. - Page 20 When scanning long documents, pull out the feed extension plates Set the feed selection lever and the eject selection lever. and eject support. Set the feed selection lever to the standard feeding position (lower position). Set the eject selection lever to the U-turn path position ( When scanning documents that contain both standard paper and plastic cards, use the straight path.
- Page 21 Place the document. Insert the document in the feed tray so that the front is facing forward and the top is facing upward. When placing documents into the feed tray, take care not to cut your hands on the edges of the paper. Make sure that the document does not exceed the loading limit ...
-
Page 22: Placing Documents For Non Separation Feeding
Placing Documents for Non Separation If you select the [Upside-down feeding] check box in the scanner driver settings, you can insert documents into the Feeding scanner in the opposite orientation ("When you want to scan a document placed upside-down" on p.48). ###HOME >... - Page 23 Adjust the document guides to fit the width of the document. With the straight path, documents are ejected at the front of the scanner. Do not place anything that will block output near the document eject area. Also, install the scanner on a smooth surface to enable documents to be smoothly ejected.
-
Page 24: Placing Cards
Placing Cards Place the card horizontally with the top edge facing upward. ###HOME > Chapter 4 Placing Documents > Placing Cards### Set the feed selection lever and the eject selection lever. Set the feed selection lever to the non separation position (upper position). The feed selection indicator will light white. -
Page 25: Placing Folded Documents
Placing Folded Documents ###HOME > Chapter 4 Placing Documents > Placing Folded Documents### With the straight path, documents are ejected at the front of the scanner. Folio Scan enables you to scan documents that are larger than LTR/ Do not place anything that will block output near the document eject A4 and therefore do not fit in the feeder. - Page 26 Place the document in the document feed tray. Under default conditions, place the document with the folded edge facing right. If the [Upside-down feeding] check box is selected in the scanner driver settings, place the document with the folded edge facing left. Set the scanning condition for folded documents on advanced settings dialog box of the scanner driver.
-
Page 27: Setting The Long Document Mode
(118.1") long by setting the scanner to the Long Document mode. Start Windows and log in as a user with administrator privileges. Click the Start button, and then click [All Programs], [Canon DR-C225], and [Canon imageFORMULA Utility]. imageFORMULA Utility starts. - Page 28 Click [CANON DR-C225 USB] and click [Properties]. Click the [Maintenance] tab, and then select a Long Document mode. Select [Long Document mode (1,000 mm)] or [Long Document mode (3,000 mm)] depending on the length of the document. (The [Events] tab may not be displayed, depending on the model.) Click [OK].
- Page 29 Click to close the dialog box. Setting Scanning Conditions Opens the scanner driver's Detail Settings screen. Configure scanning conditions as follows when scanning documents in See "Configuration and Functions of the Scanner Driver" on p.31. Long Document mode. This will open the advanced settings dialog box for the scanner. CaptureOnTouch Click to display the [Scanner Information] dialog box.
- Page 30 Chapter 5 Scanning with What is CaptureOnTouch? CaptureOnTouch ###HOME > Chapter 5 Scanning with CaptureOnTouch > What is CaptureOnTouch?### CaptureOnTouch is a scanning application that enables you to scan ###HOME > Chapter 5 Scanning with CaptureOnTouch### a document with a simple operation merely by selecting the screen This section describes the scanning procedure when using panel.
- Page 31 Chapter 6 Setting the Scanner Driver Configuration and Functions of the Scanner Driver ###HOME > Chapter 6 Setting the Scanner Driver### ###HOME > Chapter 6 Setting the Scanner Driver > Configuration and When you load the driver for the first time, the selected scanner and a Functions of the Scanner Driver### dialog for selecting the default paper size are displayed.
- Page 32 Configure basic scanning conditions such as the mode, page size, resolution, and scanning side. In addition, you can click the [Area] button and specify the area to be scanned. Gamma correction is set when the color tone of the scanned image is different from that of the image displayed on the monitor.
- Page 33 [Feeding] Tab When the scanner driver is opened from CaptureOnTouch, the following settings screen of the scanner driver appears. Specify scanner operations related to document feeding. [Others] Tab Configure settings for specialized scanning and image processing.
- Page 34 Setting Basic Scanning Conditions ###HOME > Chapter 6 Setting the Scanner Driver > Setting Basic Scanning Conditions### When you access the settings screen of the scanner driver from a This section provides an overview of the basic setting items that are TWAIN compatible application, you can switch the settings screen the minimum requirements when configuring the scanner settings.
- Page 35 Color mode Scanning Side Select the scanning mode. Select which of the sides of the document to scan. If the scanning side is set to [Skip blank page], the images of blank pages are deleted when images are saved. [Advanced Text Enhancement] and [Advanced Text Enhancement II] remove or process the background color and background surrounding text to enhance the text for easy reading.
- Page 36 Color mode Scanning Side Select the scanning mode. Select which of the sides of the document to scan. If the scanning side is set to [Skip blank page], the images of blank pages [Advanced Text Enhancement II] removes or processes the ...
- Page 37 Function Restrictions Depending on Mode [Others] Tab Setting Setting value Prescan Detect automatically ###HOME > Chapter 6 Setting the Scanner Driver > Function Restrictions Black and White Depending on Mode Setting### Error Diffusion Advanced Text Enhancement Advanced Text Enhancement II 256-level Gray 24-bit Color O: Available for setting -: Not available for setting...
- Page 38 [Image processing] dialog box O: Available for setting -: Not available for setting *1Not available for setting if all of the following conditions in the [Auto Prevent Image Type Detection Settings] dialog box are met. Bleed Edge Background • [Detection Mode] is not set to [Color or Gray] Setting value Through / emphasis...
-
Page 39: Practical Examples To Scan Unregistered Size Documents
When you want to use batch separation for scanning ....52 When you want to use multistream settings for scanning ..... 53 When you want to save a scanner driver setting ......55 Scan Panel................... 56 About the Canon imageFORMULA Driver Setting Tool ....57... -
Page 40: When You Want To Specify The Scan Area
When you want to specify the scan area Configuring the following settings allows you to scan a document of an ###HOME > Chapter 7 Special Scanning > When you want to specify the unregistered page size. scan area### When scanning a document of a non-standard page size, select [Add/ Delete] for [Page Size] to display the [Add/Delete Page Size] dialog box. -
Page 41: When You Want To Delete The Images Of The Blank Pages In Two-Sided Documents
When you want to delete the images of the blank pages in two-sided documents Select the [Set Scanning Area] check box and then specify the area of the document to be scanned. ###HOME > Chapter 7 Special Scanning > When you want to delete the images of the blank pages in two-sided documents### Set the scanning side setting to [Skip Blank Page] on the [Basic] tab to delete the images of the blank pages in the document. -
Page 42: When You Do Not Want To Scan Colored Lines And Text
When you do not want to scan colored lines and text Set the scanning side setting to [Skip blank page] to delete the images of the blank pages in the document. ###HOME > Chapter 7 Special Scanning > When you do not want to scan colored lines and text### Specify the color (red, blue, or green) to be ignored (dropped out) in the color drop-out settings on the [Image processing] tab, and that color will... -
Page 43: When You Want To Enhance The Color Red
When you want to enhance the color red Click [Image processing] and specify the color (red, blue, or green) to be ###HOME > Chapter 7 Special Scanning > When you want to enhance ignored (dropped out) in the dialog box that appears, and that color will not the color red### be scanned. -
Page 44: When You Want To Enhance Contours In Images
When you want to enhance contours in images Click [Image processing] and specify [Red Enhance] for [Color drop-out] in the dialog box that appears to enhance the color red in the document. ###HOME > Chapter 7 Special Scanning > When you want to enhance contours in images### Adjust the edge emphasis setting on the [Image processing] tab. -
Page 45: When You Want To Make Lines Or Characters In The Scanned Images Thicker
When you want to make lines or characters in the scanned images thicker Click [Image processing] and adjust the edge emphasis settings in the dialog box which appears. ###HOME > Chapter 7 Special Scanning > When you want to make lines or characters in the scanned images thicker### Drag the slider for [Character Emphasis] on the [Image processing] tab to make the lines and characters that appear in the scanned image thicker. -
Page 46: When You Want To Enhance Text That Is Difficult To Read Because Of Factors Such As The Background Of The Scanned Document
When you want to enhance text that is difficult to read because of factors such as Click [Image processing], and in the dialog box that appears adjust letter the background of the scanned document and line thickness settings. ###HOME > Chapter 7 Special Scanning > When you want to enhance text that is difficult to read because of factors such as the background of the scanned document### Select [Advanced Text Enhancement] or [Advanced Text Enhancement II]... -
Page 47: When You Want To Detect Multiple Pages Fed At The Same Time
When you want to detect multiple pages fed at the same time Select [Advanced Text Enhancement II] in the [Color mode] setting. The background behind the text is removed or processed so that the text is ###HOME > Chapter 7 Special Scanning > When you want to detect emphasized for better readability. -
Page 48: When You Want To Scan A Document Placed Upside-Down
When you want to scan a document placed upside-down Select the [Double Feed Detection] check box, and then select any one of [Detect by Ultrasonic], [Detect by Length], and [Detect by Ultrasonic and ###HOME > Chapter 7 Special Scanning > When you want to scan a Length]. -
Page 49: When You Want To Match The Orientation Of Images To The Text When Scanning A Mixture Of Pages With Different Text Orientations
When you want to match the orientation of images to the text when scanning a mixture of Select the [Upside-down feeding] check box in the dialog box that appears pages with different text orientations when you click [More] if you want to insert documents into the scanner upside-down (i.e., with the top edge of the document facing down). -
Page 50: When You Want To Rotate The Images Of A Document Placed Horizontally To Correct The Orientation
When you want to rotate the images of a document placed horizontally to correct the Select the [Text Orientation Recognition] check box. The text orientation orientation on each page is detected, and the scanned image is rotated in 90-degree increments to correct the orientation. ###HOME >... -
Page 51: When You Want To Set The Scanner Conditions Automatically
When you want to set the scanner conditions automatically Click [Image processing] and specify the rotation angle in [Document Orientation] in the dialog box that appears. ###HOME > Chapter 7 Special Scanning > When you want to set the scanner conditions automatically### Set [Full Automatic Mode] in [User Preference] to scan with scanning conditions that match the document. -
Page 52: When You Want To Use Batch Separation For Scanning
When you want to use batch separation for scanning Set [Full Automatic Mode] in [Favorite Settings] to scan with scanning conditions that match the document. ###HOME > Chapter 7 Special Scanning > When you want to use batch separation for scanning### When you want to divide and scan a document, you can separate a batch at the timing with which each next document is placed and scanned. -
Page 53: When You Want To Use Multistream Settings For Scanning
When you want to use multistream settings Set [Batch Separation] on the [Others] tab to [Auto] or [Panel]. for scanning ###HOME > Chapter 7 Special Scanning > When you want to use multistream settings for scanning### Multistream settings allow you to output multiple different scanned images with a single scan operation, and output scanned images with different scanning conditions for each of the front and back pages. - Page 54 The following shows the setting conditions that can be set in the multistream settings. Items that can be set [Basic] tab [Color mode] and [Dots per inch] (excluding [Detect automatically] for both) [Brightness] tab [Brightness] and [Contrast] [Image processing] tab [Edge emphasis], [Color drop-out] and [Character Emphasis] [Feeding] tab...
-
Page 55: When You Want To Save A Scanner Driver Setting
When you want to save a scanner driver setting When you finish configuring a setting, select [Add/Delete] of [Favorite Settings] to save the setting. ###HOME > Chapter 7 Special Scanning > When you want to save a scanner driver setting### When you finish configuring a setting, click the [Save] button of [User Preference] to save the setting. -
Page 56: Scan Panel
Scan Panel If you click [More] in the settings screen of the scanner driver and then set ###HOME > Chapter 7 Special Scanning > Scan Panel### [Feeding Option] to [Panel-Feeding] or [Automatic Feeding] in the dialog Scan Panel is software for controlling scanning operations such as feeding box which appears, Scan Panel appears when the scanner starts. -
Page 57: About The Canon Imageformula Driver Setting Tool
About the Canon imageFORMULA Driver Setting Tool ###HOME > Chapter 7 Special Scanning > About the Canon A USB connection is required to make this setting with the Canon imageFORMULA Driver Setting Tool### imageFORMULA Driver Setting Tool. When connected via wired LAN, making this setting with the Canon imageFORMULA Driver Setting Tool is ineffective. - Page 58 Chapter 8 Regular Maintenance Cleaning the Scanner ###HOME > Chapter 8 Regular Maintenance > Cleaning the Scanner### ###HOME > Chapter 8 Regular Maintenance### To clean the exterior of the scanner, dampen a cloth with water or a Clean the scanner and perform maintenance on a regular basis as mild detergent, wring the cloth out thoroughly, and then wipe the dirt described below to maintain peak scanning quality.
- Page 59 Use compressed air to remove dust and paper particles from the inside of the scanner. Scratches on the scanning glass may cause marks on the images, as well as feeding errors. If there are scratches on the scanning glass, contact your local authorized Canon dealer or service representative.
- Page 60 Clean the rollers. Reattach the retard roller and feed roller. (See "Replacing the Feed Roller" on p.67, "Replacing the Retard Roller" on p.68) Wipe the rollers with a cloth that has been dampened with water and thoroughly wrung out, and then use a dry, soft cloth to wipe away any moisture. Close the front unit by gently pushing it up on both sides until it clicks into place.
- Page 61 Open the document eject pocket. Close the document eject pocket. Clean the rollers inside the document eject pocket. Wipe the rollers with a cloth that has been dampened with water and thoroughly wrung out, and then use a dry, soft cloth to wipe away any moisture.
- Page 62 Start Windows and log in as a user with administrator privileges. Click the Start button, and then click [All Programs], [Canon DR-C225], and [Canon imageFORMULA Utility]. imageFORMULA Utility starts.
- Page 63 Click the [Maintenance] tab and then change the value of [Reduction ratio adjustment]. The adjustment value can be set within the range from -3.0% to 3.0%. Opens the scanner driver's Detail Settings screen. See "Configuration and Functions of the Scanner Driver" on p.31. This will open the advanced settings dialog box for the scanner.
- Page 64 Change the value of [Reduction ratio adjustment]. The adjustment value can be set within the range from -3.0% to 3.0%. Click to close the [Maintenance] dialog box.
-
Page 65: When To Replace The Consumable Parts
Chapter 9 Replacing Consumable Parts When to replace the consumable parts ###HOME > Chapter 9 Replacing Consumable Parts > When to replace ###HOME > Chapter 9 Replacing Consumable Parts### the consumable parts### When replacing the separation pad, perform the following steps to detach The two rollers (feed roller and retard roller) installed in the scanner are it from and attach it to the unit. -
Page 66: Opening And Closing The Front Unit
Opening and Closing the Front Unit Furthermore, the counter in the scanner that records the number of pages fed also needs to be reset when you replace the rollers. ("Resetting the Counters" on p.69) ###HOME > Chapter 9 Replacing Consumable Parts > Opening and Closing the Front Unit### Open the document feed tray. -
Page 67: Replacing The Feed Roller
Replacing the Feed Roller When closing the front unit, make sure that it is completely closed by gently pressing the left and right until you hear a click. ###HOME > Chapter 9 Replacing Consumable Parts > Replacing the Feed Roller### Open the roller cover. -
Page 68: Replacing The Retard Roller
Replacing the Retard Roller Slide the roller to the right to secure it. ###HOME > Chapter 9 Replacing Consumable Parts > Replacing the Retard Roller### Open the roller cover. Close the roller cover. Make sure that it is completely closed by pressing until you hear a click. -
Page 69: Resetting The Counters
###HOME > Chapter 9 Replacing Consumable Parts > Resetting the Counters### Start Windows and log in as a user with administrator privileges. Click the Start button, and then click [All Programs], [Canon DR-C225], and [Canon imageFORMULA Utility]. imageFORMULA Utility starts. - Page 70 Click the [Maintenance] tab, and click [Reset]. Opens the scanner driver's Detail Settings screen. See "Configuration and Functions of the Scanner Driver" on p.31. This will open the advanced settings dialog box for the scanner. Click to display the [Scanner Information] dialog box. Click [Maintenance] to display the [Maintenance] dialog box.
-
Page 71: Auto Power Off Setting
To disable this setting, follow the procedure below. The Auto Power Off setting is only available in Windows. Start Windows and log in as a user with administrator privileges. Click the Start button, and then click [All Programs], [Canon DR-C225], and [Canon imageFORMULA Utility]. imageFORMULA Utility starts. - Page 72 Click the [Maintenance] tab and then clear the [Turn off automatically after 4 hours] check box. Click [OK] to close the scanner properties.
- Page 73 Chapter 10 Uninstalling the Software Uninstallation ###HOME > Chapter 10 Uninstalling the Software > Uninstallation### ###HOME > Chapter 10 Uninstalling the Software### If the scan driver or CaptureOnTouch is not operating normally, follow the procedure below to uninstall them. Then, re-install the software from the Setup disc.
- Page 74 Chapter 11 Troubleshooting Clearing a Paper Jam ###HOME > Chapter 11 Troubleshooting > Clearing a Paper Jam### ###HOME > Chapter 11 Troubleshooting### When paper jams occur during scanning, use the following procedure to clear them. Clearing a Paper Jam ................. 74 Common Problems and Solutions ............
- Page 75 When the jammed document is on the document ejecting side, open Return the document eject tray to its original position. Make sure that the document eject tray. it is completely closed by pushing until you hear a click. Remove the jammed document. Press the OPEN button and pull open the front unit toward you.
- Page 76 Remove the jammed document. Close the front unit by gently pushing it up on both sides until it clicks into place. Make sure that the front unit is completely closed by pushing until you hear a click. After removing the jammed paper, check to see if the last page was scanned correctly, and then continue scanning.
- Page 77 This section provides recommended solutions to common problems. appear. If the problem cannot be solved by cleaning, the internal If you have a problem that is not solved by the following, contact your local glass may be scratched. Contact your local authorized Canon authorized Canon dealer. dealer.
- Page 78 Multiple pages of scanned images cannot be saved to a Scanned images are upside down. single file. Confirm the scanner driver settings. Depending on the file format, multiple scanned image pages In Windows, confirm that the [Upside-down feeding] check box in cannot be saved as a single file with CaptureOnTouch Lite and the [Feeding] tab is cleared.
- Page 79 Software Troubleshooting There is a display glitch on the UI screen of CaptureOnTouch Depending on the computer that you are using, a display glich may occur on the UI screen when there are too many Scan mode panels, Select ###HOME > Chapter 11 Troubleshooting > Software Troubleshooting### output panels, or Scanning Shortcut panels.
- Page 80 Useful tips Setting Description Start file name with character Any specified text string to be included in the file ###HOME > Chapter 11 Troubleshooting > Useful tips### string name. Here are some useful tips for scanning documents. Add date and time Appends the date and time to file names.
- Page 81 How do I print scanned data? How do I use the automatic document color detection function? For both Standard Scanning and Scanning Shotcut, select [Print] in the [Destination] panel. The scanner driver for this scanner includes a function that automatically detects the color mode from the contents of a document.
- Page 82 Chapter 12 Appendix Specifications ###HOME > Chapter 12 Appendix > Specifications### ###HOME > Chapter 12 Appendix### Main Unit Specifications ..................82 Type Desktop sheetfed scanner Replacement parts................84 Scanning Document Size Option ....................84 Plain Paper Width 50.8 mm to 216 mm (2" to 8.5") Length 53.9 mm to 356 mm (2.12"...
- Page 83 Scanning Speed (Conditions: Core i7 2.8GHz CPU, 4 GB memory, A4 document Power Consumption size, during connection to a computer running Windows) DR-C225 II 100V Scanning: maximum 11.0 W When connecting with USB cable In the sleep maximum 1.7 W Black and Simplex pages/min.
- Page 84 Flatbed Scanner Unit 102/201. The scanner driver of Flatbed Scanner Unit 102/201 needs to be installed to use the unit. Contact your local authorized Canon dealer or service representative for About Use with CaptureOnTouch detailed information about the replacement parts.
- Page 85 External Dimensions ###HOME > Chapter 12 Appendix > External Dimensions### Front View Side View...