Select Document Settings - Canon imageFORMULA DR-C225 II User Manual

Select document settings

By default, CaptureOnTouch enables the [Full auto] scan setting, so
scanning is implemented using the scan conditions that match the
document.
To specify the document size, color mode, and other settings, set the
desired scan condition by editing the scan mode panel.
Creating new [Select document] panels
Click the [New document] button, and a [New document] panel will be
added.
Click to display the list of panel types. The selected type of the panel is
created.
Edit [Select document] panel
The [Select document edit screen] opens when you click the [
the [Select document] panel.
Click the [Select document] tab in the shortcuts editing window.
Scan settings
Makes the scan settings.
[Color mode]
Select the color mode for scanning from below.
Detect automatically
24-bit Color
Grayscale
Black and White
[Page Size]
Select the paper size of the document to be scanned.
If you specify [Match original size], the page size of the scanned document
is detected and the images are saved at the detected size.
[Dots per inch]
] button in
Select the resolution.
Select [Detect automatically] and the software will automatically scan the
document at the optimum resolution.
[Scanning Side]
Select the scanning side of the document.
If you select [Skip blank page], scanned images of blank pages are not
saved.
[Automatically straightens skewed images]
If a document is not straight when fed, the scanner detects that the
document is not straight from the scanned image and straightens the
skewed image.
Select the setting from below.
Straightens with angle of fed documents, Straightens with angle contents
of fed documents
[Rotate image to match orientation of text]
Check [Enable] on to rotate the image in the same direction with the
characters.
51
Automatically determines the color mode based
on the document content and scans accordingly.
Scans the document in color.
Scans the document in Grayscale.
Scans the document in black and white (binary).