Placing Folded Documents - Canon imageFORMULA DR-C225 II User Manual

With the straight path, documents are ejected at the front of the scanner.
Do not place anything that will block output near the document eject
area. Also, install the scanner on a smooth surface to enable documents
to be smoothly ejected.

Placing Folded Documents

Folio Scan enables you to scan documents that are larger than LTR/
A4 and therefore do not fit in the feeder. To use the function, fold the
document in half lengthwise and place it into the feeder. The
DR-C225 will scan both sides and combine the scanned images into
a single image.
1
Set the feed selection lever and the eject selection lever.
Set the feed selection lever to the non separation position (upper position). The
feed selection indicator will light white.
Set the eject selection lever to the straight path position ( ).
2
Fold the document in half.
Align the left and right sides of the document, and crease the document firmly.
If the document is not folded properly, paper jams may occur or distortions may
appear in the combined scanned image.
A portion of the scanned image will be missing at the fold line.
30