Table of Contents
Advertisement
Available languages
Available languages
•
Leave to cool down for 1-2 hours before checking the filters or for blockages.
•
Clear any blockage before restarting.
•
Look for blockages in the wand, airways and cleaner head.
•
To release the hose from the machine, you will need to remove the wand.
•
Open the wand release cap.
•
Pull the wand up and away from the handle.
•
Press the red release button in the connecting collar and remove the wand from
the hose.
•
Remove the clear bin and cyclone unit. Then release the hose from the appliance
by pressing the red tab on the base of the hose – you can see it from the front of
the appliance.
•
Check for blockages in the hose.
•
Beware of sharp objects when checking for blockages.
•
To refit the hose, align the guides on the base of the hose with the channels in
the neck of the airway. Ensure the red tab faces the front of the appliance. Push
the hose on. It will click into place. To refit the wand follow the instructions above
in the 'Operation' section.
•
To remove the base plate to access an obstruction, see 'Base plate –
disassembly/reassembly'.
•
To look for blockages in the front airway between the ball and the cleaner
head you will need to remove the cleaner head: see 'Base plate – disassembly/
reassembly' below on how to do this.
•
To look for blockages in the rear airway between the ball and the cleaner
head you will need to release the hose. Hold and slide the red cuff out. Check
thoroughly for blockages and slot back into place.
•
Beware of sharp objects when checking for blockages.
•
To look for blockages in the ball, open the clear plastic inlet on the top.
•
Refit all parts securely before using.
•
Clearing blockages is not covered by your guarantee.
BRUSH BAR – CLEARING OBSTRUCTIONS
•
If your brush bar is obstructed, it may shut 'OFF'. If this happens, you will need
to remove the blockage.
•
Switch 'OFF' and unplug before proceeding. Failure to do so could result in
personal injury.
•
Beware of sharp objects when clearing obstructions.
•
If you still cannot clear the obstruction, please follow the instructions below to
remove the base plate. This gives more access to the obstruction. Alternatively,
contact a Dyson expert on the Dyson Helpline or visit the website. Clearing
brush bar obstructions is not covered by your guarantee.
BASE PLATE – DISASSEMBLY/REASSEMBLY
•
Switch 'OFF' and unplug before proceeding. Failure to do so could result in
personal injury.
•
Lay the appliance on its front.
•
Detach the red 'C' clip which is on the connection between the cleaner head
and the appliance. It is quite firm, but do not pull it off roughly. Use a constant,
firm pressure.
•
Pull the cleaner head away from the appliance. Use a constant, firm pressure.
•
At each end of the cleaner head there are 2 levers:
– swing them out at right angles
– hinge the base plate open.
•
Beware of sharp objects when clearing obstructions.
•
To refit the base plate, hinge it closed.
•
To secure the base plate push both levers back into position so they are flush
with the surface of the cleaner head.
•
Refit the red 'C' clip onto the cleaner head. The flatter edge of the clip fits
against the cleaner head. It is easier to slide one lug into its slot before the other.
•
Lay the appliance on its back.
•
Attach the cleaner head by sliding it on to the connections on the lower front
part of the ball. Ensure the electrical plug on the cleaner head fits into the twin
- block connection on the body of the appliance, which is directly above the
airway. Push firmly: the cleaner head will click into place.
DISPOSAL INFORMATION
•
Dyson products are made from high grade recyclable materials. Recycle
where possible.
•
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this product for
environmentally safe recycling.
EN
GUARANTEE TERMS AND CONDITIONS
DYSON CUSTOMER CARE
THANK YOU FOR CHOOSING TO BUY A DYSON APPLIANCE
After registering your 5 year guarantee, your Dyson appliance will be covered
for parts and labour for 5 years from the date of purchase, subject to the terms
of the guarantee. If you have any questions about your Dyson appliance, call the
Dyson Helpline with your serial number and details of where/when you bought
the appliance. Most questions can be solved over the phone by one of our
trained Dyson Helpline staff.
Alternatively, visit www.dyson.com for online help, general tips and useful
information about Dyson.
If your Dyson appliance needs a service, call the Dyson Helpline so we can
discuss the available options. If your Dyson appliance is under guarantee, and
the repair is covered, it will be repaired at no cost.
Your serial number can be found on your rating plate which is behind the
clear bin.
PLEASE REGISTER AS A DYSON
APPLIANCE OWNER
To help us ensure you receive prompt and efficient service, please register as a
Dyson appliance owner. There are two ways to do this:
•
Online at www.dyson.com
•
Telephone the Dyson Helpline.
This will confirm ownership of your Dyson appliance in the event of an insurance
loss, and enable us to contact you if necessary.
LIMITED 5 YEAR GUARANTEE
TERMS AND CONDITIONS OF THE DYSON 5 YEAR LIMITED GUARANTEE.
WHAT IS COVERED
•
The repair or replacement of your Dyson machine (at Dyson's discretion) if it is
found to be defective due to faulty materials, workmanship or function within
5 years of purchase or delivery (if any part is no longer available or out of
manufacture Dyson will replace it with a functional replacement part).
•
Where this machine is sold outside of the EU, this warranty will only be valid if
the appliance is used in the country in which it was sold.
•
Where this machine is sold within the EU, this warranty will only be valid (i) if
the appliance is used in the country in which it was sold or (ii) if the appliance is
used in Austria, Belgium, France, Germany, Ireland, Italy, Netherlands, Spain or
the United Kingdom and the same model as this appliance is sold at the same
voltage rating in the relevant country.
WHAT IS NOT COVERED
Dyson does not guarantee the repair or replacement of a product where a
defect is the result of:
•
Accidental damage, faults caused by negligent use or care, misuse, neglect,
careless operation or handling of the appliance which is not in accordance with
the Dyson Operating Manual.
•
Use of the appliance for anything other than normal domestic
household purposes.
•
Use of parts not assembled or installed in accordance with the instructions
of Dyson.
•
Use of parts and accessories which are not genuine Dyson components.
•
Faulty installation (except where installed by Dyson).
•
Repairs or alterations carried out by parties other than Dyson or its
authorised agents.
•
Blockages – please refer to the Dyson Operating Manual for details of how to
look for and clear blockages.
•
Normal wear and tear (e.g. fuse, brush bar etc.).
•
Use of this appliance on rubble, ash, plaster.
•
Reduction in battery discharge time due to battery age or use (where
applicable).
If you are in any doubt as to what is covered by your guarantee, please
contact Dyson.
SUMMARY OF COVER
•
The guarantee becomes effective at the date of purchase (or the date of delivery
if this is later).
•
You must provide proof of (both the original and any subsequent) delivery/
purchase before any work can be carried out on your Dyson appliance. Without
this proof, any work carried out will be chargeable. Keep your receipt or
delivery note.
•
All work will be carried out by Dyson or its authorised agents.
•
Any parts which are replaced by Dyson will become the property of Dyson.
•
The repair or replacement of your Dyson appliance under guarantee will not
extend the period of guarantee.
•
The guarantee provides benefits which are additional to and do not affect your
statutory rights as a consumer.
ABOUT YOUR PRIVACY
•
Your information will be held by Dyson and its agents for promotional,
marketing and servicing purposes.
•
If your personal details change, if you change your mind about any of your
marketing preferences or if you have any queries about how we use your
information, please contact the Dyson Helpline.
•
For more information on how we protect your privacy, please see our privacy
policy on the Dyson website.
FR/BE/CH
ASSEMBLAGE
•
Placer l'appareil sur le dos.
•
Fixez la tête de nettoyage en la faisant glisser sur les connecteurs situés sur la
face avant inférieure de la boule. Assurez-vous que la prise électrique de la tête
de nettoyage s'insère bien dans le bloc d'alimentation prévu sur le corps de
l'appareil, situé immédiatement au-dessus du conduit d'air. Poussez fermement :
la tête de nettoyage émet un clic lorsqu'elle est en place.
•
Mettre l'appareil en position verticale.
•
Fixez la poignée du tube en l'insérant sur le dessus de l'appareil. Le clip de
maintien de la poignée émet un clic lorsqu'il est en place.
•
Assurez-vous que le flexible est bien droit. Appuyez sur le bouton rouge du
flexible et insérez le tube dans le flexible.
•
Assurez-vous que le flexible et le tube s'encastrent bien dans la poignée. Insérez
l'extrémité du tube dans la poignée pour le verrouiller.
•
Fermer le couvercle du tube.
•
Fixez le support pour accessoires sur le côté du tube comme illustré.
•
Assurez-vous que le bloc cyclone et collecteur transparent est bien fixé à l'unité
principale de l'appareil.
•
Placez les accessoires comme illustré. Pendant l'utilisation, ils peuvent être fixés
soit au flexible, soit au tube.
•
Enrouler le cordon autour des crochets. Le bloquer à l'aide du clip de maintien.
FONCTIONNEMENT
•
Dérouler le câble.
•
Brancher l'appareil sur le réseau électrique.
•
Pour éteindre ou allumer l'appareil, appuyer sur le bouton de marche/arrêt,
situé comme indiqué.
•
Pour utiliser l'appareil, inclinez la poignée vers l'arrière. Le stabilisateur se
soulève automatiquement.
33
Advertisement
Table of Contents
