Gigabyte GA-8ITX User Manual page 97

Deleting An Array
The Delete Array <4> Menu option allows for deletion of disk array assignments. This is not the same
as deleting data from the drives themselves. If you delete an array by accident (and before it has been
used again), the array can normally be recovered by defining the array identically as the deleted
array.
WARNING: Deleting an existing disk array could result in its data loss. Make sure
to record all array information including the array type, the disk members, and stripe
block size in case you wish to undo a deletion.
Array No
Array 1
Array 2
Array 3
Array 4
1. To delete an array, highlight the Array you wish to delete and press the [Del] key.
2. The View Array Definition menu will appear (see below) showing which drives are assigned to
this array.
Array No
Array 1
Stripe Block: 64 KB
Channel:ID
1 : Master
2 : Master
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
[ Delete Array Menu ]
RAID Mode Total Drv
Mirror 2
Stripe 1
Stripe 1
----- -----
[ Keys Available ]
[ ] Up [ ] Down
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
[ Define Array Menu ]
RAID Mode Total Drv
Mirror 2
[ Drive Assignments ]
Drive Model
QUANTUMCR8.4A
QUANTUMCR8.4A
Capacity(MB)
8063
8063
8063
-----
[ESC] Exit [Del] Delete
Capacity(MB)
8063
Capacity (MB)
8063
8063
9 3
Technical Reference
Status
Functional
Functional
Functional
-----
Status
Functional
Assignment
Y
Y