Table of Contents
Advertisement
GA-8ITX Series Motherboard
L: IDE3 / IDE4 Connector(RAID/ATA100)*
1
1
F: IR/CIR
N C
GND
VCC
CIRRX
N C
N: Wake On Lan
1
+5V SB
GND
"*" For GA-8ITXR only.
IDE4
IDE3
IRTX
GND
IRRX
N C
VCC
Signal
Important Notice:
If you wish to use IDE3 and IDE4, please
use it in unity with BIOS(P.47) and
JP32(P.25) setting (either RAID or ATA100).
Then, install the correct driver to have
proper operation. For details, please refer to
the manual or the RAID manual inside the
CDROM.
Make sure the pin 1 on the IR device is
aling with pin one the connector. To
enable the IR/CIR function on the board,
you are required to purchase an option IR/
CIR module. For detail information please
contact your autherized Giga-Byte
distributor.
To use IR function only, please connect IR
module to Pin1 to Pin5.
2 0
Advertisement
Table of Contents
