Gigabyte GA-8ITX User Manual page 87

Navigating the FastBuild
When using the menus, these are some of the basic navigation tips: Arrow keys highlights through
choices; [Space] bar key allows to cycle through options;
[Enter] key selects an option; [ESC] key is used to abort or exit the current menu.
Using the Main Menu
This is the first option screen when entering the FastBuildTM Setup.
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
To create a new array automatically, follow the steps under "Creating Arrays Automatically" on page
84. Promise recommends this option for most users.
To view drives assigned to arrays, see "Viewing Drive Assignments" on page 86.
To delete an array (but not delete the data contained on the array), select "Deleting An Array" on page
93.
To rebuild a mirrored array, see "Rebuilding an Array" on page 95.
To view controller settings, see "Viewing Controller Configuration" on page 97.
NOTE: After configuring an array using FastBuild, you should FDISK and format t
he arrayed drive(s) if you are using new, blank drives. Depending on the type of
array you are using.
TM
Setup Menu
[ Main Menu ]
Auto Setup..........................................[ 1 ]
View Drive Assignments......................[ 2 ]
View Array.........................................[ 3 ]
Delete Array........................................[ 4 ]
Rebuild Array......................................[ 5 ]
Controller Configuration.........................[ 6 ]
[ Keys Available ]
Press 1...6 to Select Option [ESC] Exit
8 3
Technical Reference