Gigabyte GA-6RX User Manual page 93

6RX Series Motherboard
Viewing Controller Settings
The Controller Configuration <6> menu selection allows you to enable or disable the BIOS from
halting (the default) if it detects an error on boot up. You may also view the system resources
(Interrupt and I/O port address) of data channels.
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
Channel 1 (IDE1)
Channel 2 (IDE2)
Halting BIOS On Bootup Errors
The [Adapter Configuration – Options] section allows you to enable or disable The system to
Halt operation at the BIOS startup screen should an error be detected. This is the only option
that can be changed on this screen.
Viewing System Resources
The [System Resources Configuration] section of this submenu displays the PCI slot interrupt
and port address used by the system. The resources used are determined by the Mainboard
PCI PnP BIOS for the PCI slot in which the system resides.
In the rare case that there is a resource conflict, refer to the Mainboard BIOS documentation on
changes on resources allocated to the system PCI slot.
Please note:
The PCI3 slot does not support Master card (ex. SCSI card) when
onboard Promise function enable.
[ Adapter Configuration - Options ]
Halt On Error:
[ System Resources Configuration ]
Interrupt : A I/O Port : FFF0
Interrupt : A I/O Port : FFA8
[ Keys Available ]
[ , , Space] Change Option
85
Enable
[ESC] Exit