Table of Contents
Advertisement
After assigning the drives to a Mirroring array, press <Ctrl-Y> keys to Save your selection. The
window below will appear.
Do you want the disk image to be duplicated to another? (Yes/No)
Y - Create and Duplicate
N - Create Only
1.
Press "Y" for the Create and Duplicate option. The window below will appear asking you to
select the Source drive to use. FastBuild will copy all data from the Source drive to the
Target drive.
Channel:ID
Channel:ID
Channel:ID
1 :Master QUANTUMCR8.4A
2 :Master QUANTUMCR8.4A
2.
Use the arrow keys to choose which drive contains the existing data to be
copied.
WARNING: All target drive data will be erased. Make sure you choose the correct
drive.
3.
Press [Ctrl-Y] keys to Save selection and start duplication. The following confirmation
screen will appear.
Start to duplicate the image . . .
Do you want to continue? (Yes/No)
Y – Continue N - Abort
4.
Select "Y" to continue. If you choose "N" , you will be returned to step 1.
5.
Once "Y" is selected, the following progress screen will appear. The process will take a few
minutes.
Please Wait While Duplicating The Image
10% Complete
Source Disk
Drive Model
Target Disk
Drive Model
[Please Select A Source Disk]
Drive Model
[ ] Up [ ]
[ESC] Exit
78
Raid Introduction
Capacity (MB)
Capacity (MB)
Capacity (MB)
8063
8063
[Ctrl-Y] Save
Advertisement
Table of Contents
