Gigabyte GA-6RX User Manual page 45

6RX Series Motherboard
JP17: Rear USB Device Wake up Selection (USB Connector
Please note:
(If you want to use "USB Dev Wakeup From S3~S5" function, you have to set
the BIOS setting "USB Dev Wakeup From S3~S5" enabled, and the jumper
"JP17&JP13"enabled)
*(Power on the computer and as soon as memory counting starts, press
<Del>. You will enter BIOS Setup. Select the item "POWER MANAGEMENT
SETUP", then select "USB Dev Wakeup From S3~S5". Remember to save the
setting by pressing "ESC" and choose the "SAVE & EXIT SETUP" option.)
JP11: Front USB Device Wake up Selection (USB Port
Please note:
(If you want to use "USB Dev Wakeup From S3~S5" function, you have to set
the BIOS setting "USB Dev Wakeup from S3~S5" enabled, and the jumper
"JP11&JP13"enabled.)
*(Power on the computer and as soon as memory counting starts, press
<Del>. You will enter BIOS Setup. Select the item "POWER MANAGEMENT
SETUP", then select "USB Dev Wakeup From S3~S5". Remember to save the
setting by pressing "ESC" and choose the "SAVE & EXIT SETUP" option.)
1
Normal
(Default)
Pin No.
1-2 close
CN10
2-3 close Normal (Default)
CN9
1
Normal
(Default)
Pin No.
Front USB Device
1-2 close
Wake Up Enable
2-3 close Normal (Default)
37
1
Enable
Definition
Rear USB Device
Wakeup Enable
CN9)
1
Enable
Definition
CN10)