Table of Contents
Advertisement
DDR CAS# Latency
2 Cycles
Set DDR CAS# Latency to 2 Cycles.
2.5 Cycles
Set DDR CAS# Latency to 2.5 Cycles.
DDR Bank Interleave
4-WAY
Set DDR Bank Interleave to 4-WAY.
2-WAY
Set DDR Bank Interleave to 2-WAY.
Disabled
Disable this function.
DDR Command Rate
If you wish to maximize the performance of your DDR, set "DDR Command Rate" as "1T
Command" and set "Top Performance" as "Enabled". Please note, enabling this function
may cause your system to become unstable. For power End-User use only.
2T Command
Set DDR Command Rate to 2T Command. (Default Value)
1T Command
Set DDR Command Rate to 1T Command.
AGP Mode
4X
Set AGP Mode to 4X (Only if the AGP Card support 4X Rate).
(Default Value)
1X
Set AGP Mode to 1X.
2X
Set AGP Mode to 2X.
AGP Read Synchronization
Enabled
Enable AGP Read Synchronization. (Default Value)
Disabled
Disable AGP Read Synchronization.
AGP Fast Write
Enabled
Enable this function only if the AGP Card support Fast Write Function.
(Enable this function can increase AGP performance).
Disabled
Disable this function. (Default Value)
AGP Comp. Driving
Set AGP Comp. Driving to Auto. (Default Value)
Auto
Manual
Set AGP Comp. Driving to Manual.
If AGP Comp. Driving is Manual.
Manual AGP Comp. Driving:
00~FF
96
BIOS Setup
Advertisement
Table of Contents
