Gigabyte GA-6RX User Manual page 37

6RX Series Motherboard
Panel And Jumper Definition
J7: For 2X11 Pins Jumper
GN (Green Switch)
GD (Green LED)
HD (IDE Hard Disk Active
LED)
SPK (Speaker Connector)
RE (Reset Switch)
P+P P (Power LED)
PW (Soft Power Connector)
Please note:
Please connect the power LED, PC speaker, reset switch and power switch etc of
your chassis front panel to the front panel jumper according to the pin assignment
above.
GN HD S P K
1
P P P+
Open: Normal Operation
Close: Entering Green Mode
Pin 1: LED anode(+)
Pin 2: LED cathode( )
Pin 1: LED anode(+)
Pin 2: LED cathode( )
Pin 1: VCC(+)
Pin 2- Pin 3: NC
Pin 4: Data( )
Open: Normal Operation
Close: Reset Hardware System
Pin 1: LED anode(+)
Pin 2: LED cathode( )
Pin 3: LED cathode( )
Open: Normal Operation
Close: Power On/Off
29
RE
1
1
1
PW
GD