Gigabyte GA-6RX User Manual page 50

Step 2:
(If you want to use STR Function, please set jumper JP13 Pin1-2 (Closed.)
Step 3:
Power on the computer and as soon as memory counting starts, press <Del>. You will enter
BIOS Setup. Select the item "POWER MANAGEMENT SETUP", then select "ACPI Standby
State: S3 /STR". Remember to save the settings by pressing "ESC" and choose the "SAVE &
EXIT SETUP" option.
Congratulation! You have completed the installation and now can use the STR function.
Enable
Pin No.
1-2 close
2-3 close STR Disable (Default)
42
Suspend to RAM Installation
1
Definition
STR Enable