Page 1
6WMMC7 Series USER'S MANUAL Support Hardware Monitor. Support 3 steps ACPI LED selectable. Support Modem Ring-On (Include internal Modem and external modem on COM A & COM B) (COMB Cable is Optional) Support Wake-up On LAN (Your ATX power supply must support larger than 720 mA 5V Stand-By current).
Page 3
6WMMC7 Series The author assumes no responsibility for any errors or omissions that may appear in this document nor does it make a commitment to update the information contained herein. Third-party brands and names are the property of their respective owners. Jun.
Page 4
I. Quick Installation Guide : CPU SPEED SETUP The system bus frequency can be switched at 66MHz / 100MHz / 133MHz and Auto by adjusting JP5,JP23. The CPU ratio is control by BIOS. The CPU speed must match with the frequency ratio. It will cause system hanging up if the frequency ratio is higher than that of CPU.
Page 5
6WMMC7 Series JP5 : Set System Bus Speed (For GMCH Intel 82810L & 82810DC100) (See Figure-2) AC97 GMCH Intel 82810L & 82810DC100 2-3 66 1-2 Auto ICH/ 82801 FWH32 J20 :Cyrix CPU Turbo Function (Optional) AC97 ICH/ 82801 FWH32 INTEL CPU CLK SET Auto GMCH 82810...
Page 6
II. Jumper Setting : GN : Green Function Switch AC97 ICH/ 82801 FWH32 GD : Green Function LED AC97 PIN No. Function ICH/ 82801 FWH32 Quick Installation Guide PIN No. Function GMCH 82810 6WMMC7 Open Normal Operation 810E DC100 Short Entering Green Mode GMCH...
6WMMC7 Series HD : IDE Hard Disk Active LED AC97 PIN No. Function ICH/ 82801 FWH32 SPKR: External Speaker Connector AC97 External Speaker ICH/ 82801 FWH32 GMCH 82810 6WMMC7 810E DC100 LED + PIN No. Function GMCH 82810 6WMMC7 810E DC100 Data...
Page 8
J9: Buzzer Enable (Optional) AC97 PIN No. Function Open Internal Buzzer Disable Close Internal Buzzer Enable ICH/ 82801 FWH32 RES : Reset Switch AC97 PIN No. Function Open Normal Operation Short Reset Hardware System ICH/ 82801 FWH32 Quick Installation Guide GMCH 82810 6WMMC7...
Page 9
6WMMC7 Series PWR : Power LED Connector (as 3 steps ACPI LED) AC97 PIN No. Function ICH/ 82801 FWH32 PW: Soft Power Connector AC97 PIN No. Function Open Normal operation ICH/ Short Soft On/Off 82801 FWH32 GMCH LED + 82810 6WMMC7 810E DC100...
Page 10
IR : Infrared Connector (IR / CIR) AC97 Function IRRX IRTX ICH/ 82801 CIRRX FWH32 PS/2 Mouse / Keyboard Connector AC97 PS/2 Mouse ICH/ PS/2 Keyboard 82801 FWH32 Quick Installation Guide GMCH 6WMMC7 82810 810E PS/2 Mouse/ Keyboard Pin No. Function Data VCC(+5V)
Page 11
6WMMC7 Series USB : USB Port AC97 USB 0 USB 1 5 6 7 8 ICH/ 82801 FWH32 CPU FAN : CPU Cooling Fan Power Connector AC97 ICH/ 82801 FWH32 PIN No. Function USB V0 USB D0- USB D0+ USB V1 USB D1- USB D1+ GMCH...
Page 12
POWER FAN : Power Cooling Fan Power Connector AC97 ICH/ 82801 FWH32 SYSTEM FAN : System Cooling Fan Power Connector AC97 PIN No. Function ICH/ 82801 FWH32 Quick Installation Guide PIN No. Function GMCH Control 82810 6WMMC7 +12V 810E DC100 SENSE GMCH Control...
Page 13
6WMMC7 Series IDE1: Primary IDE Port AC97 ICH/ 82801 FWH32 IDE2: Secondary IDE Port AC97 ICH/ 82801 FWH32 GMCH 82810 810E GMCH 82810 810E...
Page 14
FLOPPY : Floppy Port AC97 ICH/ 82801 FWH32 ATX POWER : ATX Power Connector AC97 Pin No. Function 3,5,7,13, 15-17 1,2,11 3.3V 4,6,19,20 VCC +12V 6WMMC7 -12V ICH/ 82801 Power Good FWH32 5V SB stand by+5V PS-ON(Soft On/Off) Quick Installation Guide GMCH 82810 810E...
Page 15
6WMMC7 Series COM A / LPT Port AC97 LPT PORT ICH/ 82801 FWH32 VGA : VGA Port AC97 ICH/ 82801 FWH32 COM A GMCH 82810 810E GMCH 82810 810E...
Page 16
COM B : COM B Port (COMB Cable is Optional) AC97 ICH/ 82801 FWH32 JP12:Clear CMOS Function AC97 PIN No. 6WMMC7 1-2 close Clear CMOS ICH/ 2-3 close Normal (Default) 82801 FWH32 Quick Installation Guide GMCH 82810 810E 3 2 1 GMCH Function 82810...
Page 17
6WMMC7 Series J8:Game & Audio Port AC97 Line Out 6WMMC7 ICH/ 82801 FWH32 J7:CD Audio Line In AC97 PIN No. Function 6WMMC7 ICH/ 82801 FWH32 GMCH GAME 82810 810E Line In DC100 GMCH CD_L 82810 810E DC100 CD_R...
Page 18
JP11:AUX_IN (Optional) AC97 JP11 PIN No. Function 6WMMC7 ICH/ 82801 FWH32 JP3 TEL :The connector is for Modem with internal voice connector. AC97 PIN No. Function 6WMMC7 ICH/ 82801 FWH32 Quick Installation Guide AUX_L GMCH 82810 810E DC100 AUX_R GMCH 82810 Phone-in 810E...
Page 19
6WMMC7 Series J14 : Wake on LAN AC97 PIN No. Function +5V SB Signal ICH/ 82801 FWH32 J17 RING PWR ON: Internal Modem Card Ring PWR On AC97 PIN No. 6WMMC7 ICH/ 82801 FWH32 GMCH 82810 810E GMCH Function 82810 Signal 810E DC100...
Page 20
S_IRQ: Serial IRQ AC97 PIN No. Function Signal 6WMMC7 ICH/ 82801 FWH32 JP14 : Case Open AC97 JP14 PIN No. Function Signal ICH/ 82801 FWH32 Quick Installation Guide GMCH 82810 810E DC100 GMCH 82810 810E...
Page 21
6WMMC7 Series JP16: Top Block Lock AC97 PIN No. Function 1-2 close Top Block Lock 2-3 close Top Block Unlock (Default) 6WMMC7 ICH/ 82801 FWH32 JP13 :Safe mode/Recovery/Normal AC97 6WMMC7 PIN No. ICH/ 1-2close 82801 FWH32 2-3close 1-2-3open Recovery GMCH 82810 810E GMCH...
Page 22
TV/DFP :TV-Out / Digital Flat Panel Daughter Card Connector(Optional). AC97 ICH/ 82801 FWH32 J13/J20 : USB Port Selection AC97 USB 0 USB 1 J13 J20 PIN No. 1-2close Front Panel USB Enable 1-2close (USB 0 will be Disabled) 6WMMC7 2-3close Back Panel USB Enable ICH/ 2-3close...
Page 23
6WMMC7 Series J19 : Front Panel USB Port AC97 6WMMC7 ICH/ 82801 FWH32 JP15: Timeout Reboot Function AC97 PIN No. Function 1-2 close Timeout Reboot 6WMMC7 2-3 close No Reboot on Timeout ICH/ (Default) 82801 FWH32 PIN No. Function 1,4,5,10 GMCH 82810 3,7,9...
Page 24
JP22 : AMR Function Select AC97 PIN No. JP22 1-2 close 6WMMC7 ICH/ 2-3 close 82801 FWH32 Note: If you use software audio(onboard CODEC only), your modem riser must be “Secondary”. If you don’t use onboard software audio, your audio/modem riser must be “Primary”. JP24: FWH Write Protection AC97 6WMMC7...
Page 25
6WMMC7 Series BAT1: Battery AC97 Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions 6WMMC7 ICH/ 82801 FWH32 GMCH 82810 810E DC100...
Page 26
III. Top Performance Test Setting: The following performance data list is the testing results of some popular benchmark testing programs. Users have to modify the value for each item in chipset features as follow for top performance setting. CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Advanced Chipset Features Top Performance SDRAM CAS Latency Time...
Page 27
6WMMC7 Series These data are just referred by users, and there is no responsibility for different testing data values gotten by users. (The different Hardware & Software configuration will result in different benchmark testing results.) Intel Celeron DRAM (128x 1) MB SDRAM (SEC KM48S8030CT-GA) CACHE SIZE 128 KB included in CPU DISPLAY...
Page 28
Celeron 433 OC 450 (100*4.5) DRAM (64x 2) MB SDRAM (MITSUBISHI M2V64S40BTP) STORAGE Onboard IDE (IBM DJNA-352030) (ATA66) Windows98 SE2 English Ver(FAT32), DirectX 6.1, Driver 4.11.01 1185 PV 1.1 1024*768*16 bit (75Hz) Motherboard GMCH WINBENCH 99 CPU mark32 FPU Winmark Business Disk Hi-End Disk Business Graphics...
6WMMC7 Series TABLE OF CONTENTS INTRODUCTION 1.1. PREFACE ... 1-1 1.2. KEY FEATURES ... 1-1 1.3. PERFORMANCE LIST ... 1-2 1.4. BLOCK DIAGRAM... 1-4 1.5. INTRODUCE THE INTEL Pentium 1.6. INTRODUCE AMR ... 1-5 SPECIFICATION 2.1. HARDWARE ... 2-1 2.2. SOFTWARE ... 2-2 2.3.
Page 30
BIOS CONFIGURATION 4.1. ENTERING SETUP ... 4-1 4.2. CONTROL KEYS ... 4-1 4.3. GETTING HELP ... 4-2 4.3.1. Main Menu ... 4-2 4.3.2. Status Page Setup Menu / Option Page Setup Menu... 4-2 4.4. THE MAIN MENU ... 4-2 4.5. STANDARD CMOS FEATURES MENU ... 4-5 4.6.
6WMMC7 Series 1. INTRODUCTION 1.1. PREFACE Welcome to use the 6WMMC7 Series ( 6WMMC7-1 / 6WMMC7-E1 / 6WMMC7-E2 ) motherboard. It is a Socket 370 processor based PC / AT compatible system with PCI Bus, and has been designed to be the fastest PC / AT system. There are some new features allow you to operate the system with just the performance you want.
1.3. PERFORMANCE LIST The following performance data list is the testing results of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users. (The different Hardware & Software configuration will result in different benchmark testing results.) Intel Celeron...
Page 33
6WMMC7 Series Celeron 433 OC 450 (100*4.5) DRAM (64x 2) MB SDRAM (MITSUBISHI M2V64S40BTP) STORAGE Onboard IDE (IBM DJNA-352030) (ATA66) Windows98 SE2 English Ver(FAT32), DirectX 6.1, Driver 4.11.01 1185 PV 1.1 1024*768*16 bit (75Hz) Motherboard GMCH WINBENCH 99 CPU mark32 FPU Winmark Business Disk Hi-End Disk...
6WMMC7 Series 1.5. INTRODUCE THE INTEL Pentium !!! Socket 370 Processor Figure 1: INTEL Pentium !!! Socket 370 Processor 1.6 INTRODUCE AMR The Audio Modem Riser (AMR) is a new port that supports both audio and modem. The main purpose of the AMR port is to provide lower cost and higher levels of integration at all levels of the PC platform.
2. SPECIFICATION 2.1. HARDWARE Socket 370 processor. 66/100/133 MHz Socket 370 on board. Speaker Alarm when detect "CPU FAN Failure" or PROTECTION “CPU Overheat”. Automatically slow down CPU speed when "CPU Overheat". H/W monitor power status ( 5V, 12V, VGTL,5VSB, CPU voltage &...
6WMMC7 Series 1x Line in Audio Ports 1x Line out 1x Mic in 1x Game Port 1x CD Line in 1x TEL 1x AUX In (Optional) Suspend mode support. GREEN FUNCTION Green switch & ACPI LED support. IDE & Display power down support. Monitors all IRQ / DMA / Display / I/O events.
HARDWARE INSTALLATION 3.1. UNPACKING The main board package should contain the following: The 6WMMC7 Series (6WMMC7-1/6WMMC7-E1/6WMMC7-E2) main board. USER'S MANUAL for main board. Cable set for IDE, Floppy devices. COMB Cable is Optional. CD for main board Utility. [IUCD (Bus Master + Sound Driver + LDCM + Utility), INTEL 82810 Driver.] The main board contains sensitive electric components, which can be easily damaged by static electricity, so the main board should be left in its original...
3.3. QUICK REFERENCE FOR JUMPERS & CONNECTORS I/O Ports Connector USB port. IDE1 For Primary IDE port. IDE2 For Secondary IDE port. PS/2 For PS/2 Mouse & Keyboard port. FLOPPY For Floppy port. COMA For Serial port1 (COM A){Support Modem Ring On}. COMB For Serial port2 (COM B){Support Modem Ring On}.
Page 42
6WMMC7 Series PWR FAN: Power FAN Connector Pin No. Control +12V SENSE SYS FAN: System FAN Connector Pin No. Control +12V SENSE J9:Buzzer Enable (Optional) Pin No. Open Internal Buzzer Disable Close Internal Buzzer Enable J17 RING PWR ON :Internal Modem Card Ring PWR On Pin No.
Page 43
J14:Wake on LAN Pin No. +5V SB Signal JP3:TEL –The connector for Modem with internal voice connector. Pin No. Phone-in Mono-out JP14: Case Open Pin No. Signal JP13 : Safe Mode/Recovery/Normal Pin No. 1-2 close Normal (Default) 2-3 close Safe Mode 1-2-3open Recovery JP16: Top Block Lock...
Page 44
6WMMC7 Series J19: Front Panel USB Port Pin No. 1,4,5,10 3,7,9 USB P0+ USB P0- JP24:FWH Write Protection Pin No. Function 1-2 close Enabled. 2-3 close Disabled (Default) S_IRQ: Serial IRQ Pin No. Signal J12 : For 2X11 PINs Jumper PWR P+P P HD Soft PWR: Soft Power Connector Open: Normal Operation...
P+P P : Power LED PIN 1 : LED anode (+) PIN 2 : LED cathode ( ) PIN 3 : LED cathode ( ) SPKR: Speaker Connector PIN 1 : VCC (+) PIN 2 : NC PIN 3 : NC PIN 4 : Data ( ) HD: IDE Hard Disk Active LED PIN 1: LED anode (+)
6WMMC7 Series 3.5. CPU SPEED SETUP The system bus frequency can be switched at 66MHz / 100MHz / 133MHz and Auto by adjusting JP5,JP23. The CPU ratio is control by BIOS. JP5 / JP23 : Set System Bus Speed (For GMCH Intel 82810E) (See Figure-1) GMCH Intel 82810E AC97...
JP5 : Set System Bus Speed (For GMCH Intel 82810L & 82810DC100) (See Figure-2) AC97 GMCH Intel 82810L & 82810DC100 2-3 66 1-2 Auto ICH/ 82801 FWH32 3.6. CMOS RTC & ISA CFG CMOS RAM There're RTC & CMOS RAM on board; they have a power supply from external battery to keep the DATA inviolate &...
6WMMC7 Series 3.8. HARDWARE RESET SWITCH CONNECTOR INSTALLATION The RESET switch on panel provides users with HARDWARE RESET function. The system will do a cold start after the RESET switch is pushed and released by user. The RESET switch is a 2 PIN connector and should be installed to RST on main board.
4.BIOS CONFIGURATION Award's BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off.
6WMMC7 Series 4.3. GETTING HELP 4.3.1. Main Menu The on-line description of the highlighted setup function is displayed at the bottom of the screen. 4.3.2. Status Page Setup Menu / Option Page Setup Menu Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item.
Page 51
Standard CMOS Features This setup page includes all the items in standard compatible BIOS. Advanced BIOS Features This setup page includes all the items of Award special enhanced features. Advanced Chipset Features This setup page includes all the items of chipset special features. Integrated Peripherals This setup page includes all onboard peripherals.
Page 52
6WMMC7 Series Set User password Change, set, or disable password. It allows you to limit access to the system. Save & Exit Setup Save CMOS value settings to CMOS and exit setup. Exit Without Saving Abandon all CMOS value changes and exit setup.
4.5. STANDARD CMOS FEATURES MENU The items in Standard CMOS Setup Menu (Figure 4.2) are divided into 9 categories. Each category includes no, one or more than one setup items. Use the arrows to highlight the item and then use the <PgUp> or <PgDn> keys to select the value you want in each item.
Page 54
6WMMC7 Series Date The date format is <week>, <month> <day> <year>. week The week, from Sun to Sat, determined by the BIOS and is display-only month The month, Jan. Through Dec. The day, from 1 to 31 (or the maximum allowed in the month) year The year, from 1994 through 2079 Time...
Page 55
Drive A type / Drive B type The category identifies the types of floppy disk drive A or drive B that has been installed in the computer. None No floppy drive installed 360K, 5.25 in. 5.25 inch PC-type standard drive; 360K byte capacity. 1.2M, 5.25 in.
Page 56
6WMMC7 Series Halt on The category determines whether the computer will stop if an error is detected during power up. NO Errors The system boot will not stop for any error that may be detected and you will be prompted All Errors Whenever the BIOS detects a non-fatal error the system will be stopped...
4.6. Advanced BIOS Features CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Advanced BIOS Features Virus Warning First Boot Device Second Boot Device Third Boot Device Boot Up Floppy Seek Boot Up NumLock Status Typematic Rate Setting Typematic Rate (Chars/Sec) Typematic Delay (Msec) Security Option HDD S.M.A.R.T.
Page 58
6WMMC7 Series First / Second / Third Boot device The default value is Floppy / HDD-0 / LS120. Floppy Select your boot device priority by Floppy LS120 Select your boot device priority by LS120 HDD-0~3 Select your boot device priority by HDD-0~3 SCSI Select your boot device priority by SCSI CDROM...
Page 59
Typematic Rate (Chars / Sec.) The default value is 6. 6-30 Set the maximum Typematic rate from 6 chars. Per second to 30 characters. Per second. Typematic Delay (Msec.) The default value is 250. 250-1000 Set the time delay from first key to repeat the same key in to computer.
6WMMC7 Series 4.7. Advanced Chipset Features CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Advanced Chipset Features Top Performance SDRAM CAS Latency Time SDRAM Cycle Time Tras/Trc SDRAM RAS-to-CAS Delay SDRAM RAS Precharge Time SDRAM Buffer Strength Delayed Transaction Local Memory Frequency * Onboard Display Cache Setting * Initial Display Cache Display Cache Timing...
Page 61
SDRAM Cycle Time Tras/Trc The default value is 5/7 Set DRAM Tras/Trc Cycle time is 6/8 SCLKs. Set DRAM Tras/Trc Cycle time is 5/7 SCLKs. SDRAM RAS- to-CAS delay The default value is 2 Set SDRAM RAS- to-CAS delay 3 SCLKs. Set SDRAM RAS-to-CAS delay 2 SCLKs.
Page 62
6WMMC7 Series Initialize Display Cache The default value is Enabled. Disabled Disabled Initialize Display Cache. Enabled Enabled Initialize Display Cache. Display Cache Timing The default value is Auto. Fast Set Display Cache Timing to Fast. Normal Set Display Cache Timing to Normal. Auto Set Display Cache Timing to Auto.
4.8. Integrated Peripherals CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Integrated Peripherals On-Chip Primary PCI IDE On-Chip Secondary PCI IDE IDE Primary Master PIO IDE Primary Slave PIO IDE Secondary Master PIO IDE Secondary Slave PIO IDE Primary Master UDMA IDE Primary Slave UDMA IDE Secondary Master UDMA IDE Secondary Slave UDMA...
Page 64
6WMMC7 Series On-Chip Primary PCI IDE The default value is Enabled. Enabled Enable onboard 1st channel IDE port. Disabled Disable onboard 1st channel IDE port. On-Chip Secondary PCI IDE The default value is Enabled. Enabled Enable onboard 2nd channel IDE port. Disabled Disable onboard 2nd channel IDE port.
Page 65
IDE Secondary Slave PIO (for onboard IDE 2nd channel). The default value is Auto. Auto BIOS will automatically detect the IDE HDD Accessing mode. Mode0~4 Manually set the IDE Accessing mode. IDE Primary Master UDMA. The default value is Auto. Auto BIOS will automatically detect the IDE HDD Accessing mode.
Page 66
6WMMC7 Series USB Controller The default value is Enabled. Enabled Enable USB Controller. Disabled Disable USB Controller. USB Keyboard Support The default value is Disabled. Enabled Enable USB Keyboard Support. Disabled Disable USB Keyboard Support. Init Display First The default value is PCI Slot. PCI Slot Set Init Display First to PCI Slot.
Page 67
Onboard FDC Controller The default value is Enabled. Enabled Enable onboard FDC port. Disabled Disable onboard FDC port. Onboard Serial Port 1 The default value is Auto. Auto BIOS will automatically setup the port 1 address. 3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8. 2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8.
Page 68
6WMMC7 Series UART Mode Select (This item allows you to determine which Infra Red(IR) function of Onboard I/O chip) The default value is Normal ASKIR Onboard I/O chip supports ASKIR. IrDA Onboard I/O chip supports IrDA. Normal Onboard I/O chip supports Normal. RxD , TxD Active The default value is Hi,Lo.
Page 69
EPP Version The default value is 1.7. EPP 1.9 EPP Version is 1.9. EPP 1.7 EPP Version is 1.7. Game Port Address The default value is 201. Disabled Disabled On Board IDE Set onboard game port is 201. Set onboard game port is 209. Midi Port Address The default value is 330.
6WMMC7 Series 4.9. POWER MANAGEMENT SETUP CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Power Management Setup Video Off Method Video Off In Suspend Suspend Type MODEM Use IRQ Suspend Mode HDD Power Down Soft-Off by PWR-BTTN Power LED in Suspend AC BACK Function Wake-Up by PCI card ModemRingOn/WakeOnLan...
Page 71
Video off Method The default value is DPMS. V/H SYNC+Blank BIOS will turn off V/H-SYNC when gets into Green mode for Green monitor power saving. Blank Screen BIOS will only black monitor when gets into Green mode. DPMS BIOS will use DPMS Standard to control VGA card. (The Green type VGA card will turn off V/H-SYNC automatically.) Video Off In Suspend...
Page 72
6WMMC7 Series HDD Power Down The default value is Disable. Disable Disable HDD Power Down mode function. 1-15 mins. Enable HDD Power Down mode between 1 to 15 mins. Soft-off by PWR-BTTN The default value is Instant-off. Instant-off Soft switch ON/OFF for POWER ON/OFF Delay 4 Sec.
Page 73
FAN Off In Suspend The default value is Enabled. Disabled Disable this function. Enabled Stop CPU FAN when entering Suspend mode. CPU Thermal-Throttling The default value is 50%. 87.5% Monitor CPU Temp. will cause system slow down CPU Duty Cycle to 87.5%. 75.0% Monitor CPU Temp.
Page 74
6WMMC7 Series Primary IDE 0/1 The default value is Disabled. Disabled Disable this function. Enabled Enable monitor Primary IDE 0/1 for Green event. Secondary IDE 0/1 The default value is Disabled. Disabled Disable this function. Enabled Enable monitor Secondary IDE 0/1 for Green event. FDC/COM/LPT Port The default value is Enabled.
4.10. PnP/PCI Configurations CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software PnP/PCI Configurations PNP OS Installed Reset Configuration Data Resources Controlled By * IRQ Resources *DMA Resources PCI/VGA Palette Snoop Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults Figure 4.7: PCI Slot Configuration PNP OS Installed The default value is No.
Page 76
6WMMC7 Series Resources Controlled by The default value is Auto (ESCD) Manual User can set the PnP resource (I/O Address, IRQ & DMA channels) used by legacy ISA DEVICE. Auto BIOS automatically use these PnP rescuers. IRQ (3,4,5,7,9, 10,11,12,14,15),DMA(0,1,3,5,6,7) assigned to The default value is "Legacy ISA"...
4.11. PC Health Status CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software PC Health Status Reset Case Open Status Case Opened Current CPU Temperature CPU FAN Speed Power FAN Speed System FAN Speed VCORE VGTL VCC3 + 5V +12V - 12V - 5V VBAT 5VSB...
Page 78
6WMMC7 Series Current Voltage (V) VCORE / VGTL/ VCC3 / 12V / 5V /VBAT /5VSB Detect system’s voltage status automatically. CPU Warning Temperature ( C / F) The default value is Disabled 65 C / 149 F Monitor CPU Temp. at 65 C / 149 F 70 C / 158 F Monitor CPU Temp.
Page 79
BIOS Configuration Fan Fail Alarm (CPU / Power / System) The default value is Disabled Disabled Fan Fail Alarm Function Disabled. Enabled Fan Fail Alarm Function Enabled. 4-31...
6WMMC7 Series 4.12. Frequency/Voltage Control CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Frequency/Voltage Control Auto Detect DIMM/PCI Clk CPU Type Intel CELERON ™ Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults Figure 4.9: Frequency/Voltage Control Auto Detect DIMM/PCI Clk The default value is Enabled.
6WMMC7 Series 4.13. Load Fail-Safe Defaults CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Management Setup PnP/PCI Configurations Load Fail-Safe Defaults (Y/N)? N PC Health Status ESC:Quit F10:Save & Exit Setup Load Fail-Safe Defaults Figure 4.10: Load Fail-Safe Defaults Load Fail-Safe Defaults...
4.14. Load Optimized Defaults CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Management Setup Load Optimized Defaults (Y/N)? N PnP/PCI Configurations PC Health Status ESC:Quit F10:Save & Exit Setup Load Optimized Defaults Figure 4.11: Load Optimized Defaults Load Optimized Defaults...
6WMMC7 Series 4.15. Set Supervisor / User Password When you select this function, the following message will appear at the center of the screen to assist you in creating a password. CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals...
4.16. Save & Exit Setup CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Management Setup PnP/PCI Configurations SAVE to CMOS and EXIT (Y/N)? Y PC Health Status ESC:Quit F10:Save &...
6WMMC7 Series 4.17. Exit Without Saving CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Management Setup PnP/PCI Configurations Quit Without Saving (Y/N)? N PC Health Status ESC:Quit F10:Save & Exit Setup Abandon all Datas Figure 4.14: Exit Without Saving Type "Y"...
C:\utility\ AWDFlash or AMIFlash <filename of the BIOS binary file intended for flashing> Once the process is finished, reboot the system Note : Please download the newest BIOS from our website (www.gigabyte.com.tw) or contact your local dealer for the file. Appendix...
Page 89
Product Name: Mother Board residential GA-6WMMC7 Model Number: generates, Conforms to the following specifications: FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a), frequency energy, and if not installed and used...
Ausschlager Weg 41, 1F, 20537 Hamburg, Germany declare that the product ( description of the apparatus, system, installation to which it refers) Mother Board GA-6WMMC7 is in conformity with (reference to the specification under which conformity is declared) in accordance with 89/336 EEC-EMC Directive...