Notes On Using The Remote Control - BenQ RM750K Installation Handbook

• Do not install near any heat source such as radiators, heat registers, stoves, other apparatus
(including amplifiers) that produce heat or put the unit exposed to direct spotlight or sunlight.

Notes on using the remote control

Point and aim the top front of the remote control directly at the display's remote control
sensor window when you press the buttons. Do not let the remote control become wet or
place it in humid environments (like bathrooms).
8 Display installation guide
8M
30° 30°
30
When using the remote control, confirm there is no
object between the remote control and the remote
sensor of the product.
Operate the remote control from a location closer to
the display's remote control sensor window. Adjust the
distance between the remote control and the display.
Straight-line distance: 8 meters
Transmit angle: ± 30°
The sensor window's position may vary by models.
For IL430/IL490/IL550, when two displays place together,
the signal of the remote control is easily interfered by
the Touch screen signal.
• Do not place the remote control receiver of the display
parallel to the front frame of another display or its
signal will be interfered by Touch screen's signal. Please
keep the distance for at least 20 mm when placing two
monitors side by side.
• Use an IR extender cable (3.5 mm cable) to avoid
interference between IR remote controller and the
Touch Screen when placing multiple displays
side-by-side.
The remote control may not function properly when the
remote control sensor on the display is under direct sunlight
or strong illumination, or when there is an obstacle in the path
of signal transmission.