Digital Signage Bar-Type Series; Installation Notice; Adjusting The Osd Setting: For Bh280/Bh281/Bh380 - BenQ RM750K Installation Handbook

Digital Signage Bar-Type Series

The bar type display panel is a long structured design panel. Designed with a slim form factor,
the display panel can be used in small or large spaces to display everyday information.

Installation notice

• When the display is connected to the PCs or laptop, it is at its native resolution.
BH280/BH281/BH2801/BH2801N
BH3801/BH3801N/BH3801D
• Set the display to the projector mode. The picture will be displayed with full screen.
• If the aspect ratio of the picture is the same as that of the display, the picture can be fully
shown without distortion.
Position
Top
Bottom
Middle
Zoom Out
Zoom In

Adjusting the OSD setting: For BH280/BH281/BH380

The resolution can be adjusted to 1920x1080. You can make the following display effects by
adjusting the OSD setting.
• If the input source is not1920x1080, only Zoom Out can be selected.
• Frequency
Model
BH2401
BH3501
BH380
The window is positioned to the top 1/3 of the screen.
The window is positioned to the bottom 1/3 of the screen.
The window is positioned to the middle 1/3 of the screen.
The full screen is compressed into the window.
• When the window is positioned to the top 1/3 of the screen,
the input image zooms in 3%.
• When the image is on the top and does not fill the screen, you
can choose this position to present the best effect.
: Frequency narrows or widens the screen.
Native Resolution (pixels)
1920 x 190
1920 x 130
1920 x 360
1920 x 545
1920 x 600
Description
Digital Signage Bar-Type Series 59