Save A Redial Entry To The Directory - VTech TL8901 User Manual

Telephone operation
Redial
To dial a redial entry of the telephone base:
Lift the corded handset, or press 1 LINE or
1.
2 LINE. Then, press REDIAL to enter the redial list.
Press DIR, CID, /DELETE or /REC to browse
2.
and then press the DIAL softkey to dial the
number displayed.
You can also select a redial entry before dialing.
1. Press REDIAL in idle mode.
Press DIR, CID, /DELETE or /REC to browse
2.
until the desired number displays. The telephone base beeps twice at the
end of the list.
Press 1 LINE or 2 LINE to use the corresponding line, or press
3.
CELLULAR
NOTE: You may also lift the corded handset or press SPEAKER
The default line for the corded handset and speakerphone are determined by the line
preference setting. To change the setting, please see page 43.

Save a redial entry to the directory

Using a cordless handset:
Press REDIAL/
1.
2. Press or
Press the SAVE softkey.
3.
The handset displays ENTER NUMBER. Use the dialing keys to edit the
4.
number, if necessary.
• Press
OFF
• Press to move the cursor to the right or
• Press and hold
Press the NEXT softkey.
5.
The handset displays SELECT TYPES. Press
6.
following types:
• Home
• Cell
• Work
• Other
Press the NEXT softkey. The handset displays ENTER NAME. Use the
7.
dialing keys (page 95) to enter a name.
• Press
OFF
• Press to move the cursor to the right or
Press the SAVE softkey to confirm and you hear a confirmation tone.
8.
to use the cell line.
in idle mode.
PAUSE
to browse until the desired number displays.
/CLEAR to erase a digit.
/PAUSE to insert a dialing pause (a p appears).
REDIAL
/CLEAR to erase a character.
to the left.
or
to the left.
81
to dial a redial entry.
to select one of the