Printing In Two Colors; Originals - Gestetner 5309L Operating Instructions Manual

Note
❒ Make sure that the Cover Open
indicator (M) turns off, and the
COLOR is shown in the guid-
ance display.

Printing in Two colors

After printing in one color, you can
print in another color on the same
side of the print.
Important
❒ Leave the prints for a while before
printing on them again to let the
ink dry.
❒ If the prints are not dry, the paper
feed roller might become dirty. In
this case, wipe off the roller with a
cloth.
Note
❒ You cannot print in two colors at a
time.
A A A A
Prepare two originals. Set the first
original on the exposure glass.
B B B B
Press the { { { { Master Making} } } } key.
Color Printing Using the Optional Color Drum
C C C C
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the { { { { Image
Position} } } } keys (see ⇒ p.21
"Shifting the Print Image Posi-
tion Forward or Backward") or
the side tray fine adjusting dial
(see ⇒ p.21 "Shifting the Print
Image Position to the Right or
Left").
D D D D
Enter the number of prints with
the number keys.
E E E E
Press the { { { { Print Start} } } } key.
GRPREP0E
2
65
DRAFT 2002/08/02