Selecting Original Type - Gestetner 5309L Operating Instructions Manual

Selecting Original Type

Select one of the following three types
to match your originals:
❖ ❖ ❖ ❖ Photo mode
Delicate tones of photographs and
pictures can be reproduced with
this mode.
❖ ❖ ❖ ❖ Letter mode
Select this mode when your origi-
nals contain only letters (no pic-
tures).
❖ ❖ ❖ ❖ Letter/Photo mode
Select this mode when your origi-
nals contain photographs or pic-
tures with letters.
Note
❒ Moire patterns might occur when
screened originals are printed.
❒ When using Photo mode to print
originals with both letter and pho-
tographs, the letter will appear
lighter. To avoid this, select Let-
ter/Photo mode with the { { { { Type of
Original} } } } key.
A A A A
Press the { { { { Type of Original} } } } key to
select Photo mode.
B B B B
Press the { { { { Image Density} } } } key to ad-
just the image density.
C C C C
Set your originals on the exposure
glass or in the optional document
feeder.
D D D D
Press the { { { { Master Making} } } } key.
E E E E
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the { { { { Image
Position} } } } keys (see ⇒ p.21
"Shifting the Print Image Posi-
tion Forward or Backward") or
the side tray fine adjusting dial
(see ⇒ p.21 "Shifting the Print
Image Position to the Right or
Left").
F F F F
Make your prints.
Selecting Original Type
37
DRAFT 2002/08/02
1