Table of Contents
Advertisement
AdonisC2_ENcopy122F_FM.book Page 69 Thursday, February 15, 2001 3:23 PM
To interrupt copying after all originals
have been fed
A
Press the { { { { Interrupt} } } } key.
The Interrupt indicator goes on.
Note
❒ Copying will not stop yet.
B
Set your original.
C
Press the { { { { Start} } } } key.
The machine stops the original job
and starts copying your original.
D
When copying is complete, re-
move your originals and copies.
E
Press the { { { { Interrupt} } } } key again.
The Interrupt indicator goes off.
The previous copy job settings will
be restored and the machine will
continue copying from where it
left off.
Original Beeper
The beeper sounds and an error mes-
sage is displayed when you leave
your originals on the exposure glass
after copying.
Note
❒ To cancel this function, ⇒ "Tone:
Original remains" in P.215 "Gener-
2
al Features
/
".
4
Sample Copy
Use this function to check a copy set
before making a long copy run.
Limitation
❒ This function can be used only
when the Sort function has been
turned on.
A
Select Sort and any other func-
tions, then enter the number of
copy sets to be made.
B
Set the originals.
C
Press the { { { { Sample Copy} } } } key.
One copy set is delivered for proof
copying.
D
After checking the finish, press
the [Print] key if the sample is ac-
ceptable.
The number of copies made is the
number you specified minus one
for the proof copy.
Note
❒ If you press the [Suspend] key
after checking the finish, return
to step A to adjust the copy set-
tings as necessary. You can
change the settings for Staple,
Punch, Duplex, Copy Orienta-
tion, Stamp, Margin Adjust, and
Cover/Slip Sheet. However, de-
pending on the combinations of
functions, some settings might
not be changed.
❒ You cannot use the Sample
Copy function after changing
the settings.
Other Functions
2
69
Advertisement
Table of Contents
