Gestetner 1045 User Manual page 67

F
Enter a Horizontal size with the
number keys.
Note
❒ For the horizontal length, speci-
fy from 128 to 1200mm or from
5.5 to 47 inches. You cannot
specify shorter than 128mm,
also longer than 1200mm.
❒ Each time you press [mm] or
[inch], the units change between
"mm" and "inch" alternately. If
you enter a length and change
the unit by pressing [mm] or
[inch], the length is converted
automatically according to the
unit (fractions are rounded off).
For Example, When you enter
{2}, {5} and {0} in millimeters
and change to "inch", the length
"9.8inch" is shown on the dis-
play. If you press [mm] or [inch]
again, "249mm" is displayed.
❒ If you make a mistake, press
[Clear] and try again.
❒ To cancel a scan size from pro-
graming, press [Cancel].
G
Select a Vertical size.
Note
❒ A displayed vertical size differs
depending on selected unit.
When [mm] is selected, [Auto de-
tect], [210mm (A4)], [257mm(B4
JIS)], [297mm (A3)], [216mm (8 1/2)]
and [279mm (11)] are shown.
When [inch] is selected, [Auto de-
tect], [8.3inch (A4)], [10.1inch(B4
JIS)], [11.7inch (A3)], [8.5inch] and
[11.0inch] are shown.
❒ To cancel a scan size from pro-
graming, press [Cancel].
H
Press [OK].
I
Press [Exit].
J
Press the { { { { User Tools/Counter} } } } key.
The initial display is shown.
Program/Delete Menu
117
7