Gestetner 1045 User Manual page 44

Simplifying the Operation
B
Press the { { { { Program} } } } key.
The program (facsimile) is shown.
C
Press [Register].
Registered program number and
names are shown in the keys. If
there are none registered, "pNot
Programed" is shown.
6
D
Select the program number which
p Not Programed" is shown. p p
"p
Note
❒ If you make a mistake, press
[Delete] and try again.
E
Enter the program name.
The "Program Name" display is
shown.
Note
❒ You should register the pro-
gram name.
94
F
Press [OK].
The program has been registered.
G
Press [Exit].
The initial display is shown.
Using a Program
Example of executing a program
using Send Later with the fax
number "0123456789".
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the {Facsimile}
key.
B
Place your original.
Note
❒ If you have not programed des-
tinations or scan settings for
program, enter the fax number
for the destination and select
any scan settings you require.
C
Press the { { { { Program} } } } key.